No sorry...I am not able to autoboot also... It reaches the point ,Loading kernel image..... Then it is stuck.... (By autoboot,i understood as,the o/p that appears on booting the board without any env var setting through minicom terminal)
By the by where is this normal.scr file? I dont have such a file On Fri, Sep 25, 2009 at 3:00 PM, Kaushik(ICMAN) <[email protected]>wrote: > Ok. here is a question? > Are you able to auto boot? If yes Share me your normal.scr file content. > > > > On Fri, Sep 25, 2009 at 2:26 AM, sanyanniesunney anniesunney < > [email protected]> wrote: > >> when i set the bootcmd and provide the address as 0x80200000, >> then it gives me the foll o/p >> >> ** Unable to use mmc 0:1 for fatload ** >> >> >> On Fri, Sep 25, 2009 at 2:52 PM, Kaushik(ICMAN) < >> [email protected]> wrote: >> >>> can u change the address to 0x80200000 at both places in bootcmd...I >>> guess that is your problem. Let me know after checking. >>> >>> >>> On Fri, Sep 25, 2009 at 2:15 AM, sanyanniesunney anniesunney < >>> [email protected]> wrote: >>> >>>> When i print the bootargs it is printing correctly.. >>>> But when i am trying ti seteenv bootargs i am getting the following >>>> error.. >>>> >>>> OMAP3 beagleboard.org # setenv bootcmd mmcinit;fatload mmc 0 0x80300000 >>>> uImage;bootm 0x80300000 >>>> >>>> ** Unable to use mmc 0:1 for fatload ** >>>> Wrong Image Format for bootm command >>>> ERROR: can't get kernel image! >>>> >>>> Why is this so? >>>> >>>> On Fri, Sep 25, 2009 at 2:32 PM, Kaushik(ICMAN) < >>>> [email protected]> wrote: >>>> >>>>> Can you make sure that you followed ...the steps mentioned in the >>>>> link below. I believe that your bootargs are wrong. >>>>> >>>>> http://kaushikprajapati.wordpress.com/2009/09/20/33/ >>>>> <http://kaushikprajapati.wordpress.com/2009/09/20/33/> >>>>> >>>>> On Fri, Sep 25, 2009 at 1:56 AM, sanyanniesunney anniesunney < >>>>> [email protected]> wrote: >>>>> >>>>>> Yes i am using the beagle board.. >>>>>> and i am also booting from the SD card! >>>>>> >>>>>> what should i do.... >>>>>> >>>>>> On Fri, Sep 25, 2009 at 2:09 PM, Kaushik(ICMAN) < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> I believe the address is wrong. Are you using beagleboard?? and >>>>>>> booting from SD card?? >>>>>>> >>>>>>> >>>>>>> On Fri, Sep 25, 2009 at 1:23 AM, sanyanniesunney anniesunney < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Hi, >>>>>>>> >>>>>>>> I have already done this and my o/p at the minicom terminal was like >>>>>>>> this, >>>>>>>> >>>>>>>> Texas Instruments X-Loader 1.41 >>>>>>>> Starting OS Bootloader... >>>>>>>> >>>>>>>> >>>>>>>> U-Boot 2008.10-rc2 (Oct 2 2008 - 09:02:46) >>>>>>>> >>>>>>>> OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz >>>>>>>> OMAP3 Beagle board + LPDDR/NAND >>>>>>>> DRAM: 128 MB >>>>>>>> NAND: 256 MiB >>>>>>>> In: serial >>>>>>>> Out: serial >>>>>>>> Err: serial >>>>>>>> Hit any key to stop autoboot: 0 >>>>>>>> reading uImage >>>>>>>> >>>>>>>> 1820016 bytes read >>>>>>>> ## Booting kernel from Legacy Image at 80300000 ... >>>>>>>> Image Name: Linux-2.6.29-omap1 >>>>>>>> Image Type: ARM Linux Kernel Image (uncompressed) >>>>>>>> Data Size: 1819952 Bytes = 1.7 MB >>>>>>>> Load Address: 00008000 >>>>>>>> Entry Point: 00008000 >>>>>>>> Verifying Checksum ... OK >>>>>>>> Loading Kernel Image ... >>>>>>>> It get stuck at this point! >>>>>>>> Now i dunno how to proceed! >>>>>>>> >>>>>>>> On Fri, Sep 25, 2009 at 12:59 PM, Kaushik(ICMAN) < >>>>>>>> [email protected]> wrote: >>>>>>>> >>>>>>>>> Enabling Network >>>>>>>>> >>>>>>>>> - Connect eth0 interface to usb hub via ethernet to usb >>>>>>>>> converter >>>>>>>>> - Edit init.rc from <Android_RFS>/init.rc >>>>>>>>> >>>>>>>>> #basic network init >>>>>>>>> setprop net.dns1 <primary-dns-server-ip> >>>>>>>>> >>>>>>>>> >>>>>>>>> - Boot Beagle board >>>>>>>>> - Execute following commands from minicom >>>>>>>>> >>>>>>>>> $netcfg eth0 up >>>>>>>>> $netcfg eth0 dhcp >>>>>>>>> >>>>>>>>> *NOTE:-* Enable appropriate driver for your "ethernet to usb >>>>>>>>> converter" in kernel. Driver can be found at :- >>>>>>>>> >>>>>>>>> │ -> DeviceDrivers │ │ -> Network device support (NETDEVICES[=y]) │ >>>>>>>>> │ -> USB Network Adapters >>>>>>>>> >>>>>>>>> On Fri, Sep 25, 2009 at 12:29 AM, Kaushik(ICMAN) < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>>> You can do make menuconfig and try to find out the driver for >>>>>>>>>> your device and then create new uImage that will have the USB network >>>>>>>>>> Adpater driver. >>>>>>>>>> >>>>>>>>>> http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> <http://kaushikprajapati.wordpress.com/2009/09/25/a-hand-out-on-how-to-do-make-menuconfig-on-android-kernel/> >>>>>>>>>> >>>>>>>>>> On Fri, Sep 25, 2009 at 12:26 AM, sanyanniesunney anniesunney < >>>>>>>>>> [email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> I am using USB ethernet adapter,whose one end is connected to the >>>>>>>>>>> USB hub and the other end is connected to the ethernet cable..... >>>>>>>>>>> >>>>>>>>>>> On Fri, Sep 25, 2009 at 12:38 PM, Kaushik(ICMAN) < >>>>>>>>>>> [email protected]> wrote: >>>>>>>>>>> >>>>>>>>>>>> Are you trying to use USB to Ethernet cable or you are trying to >>>>>>>>>>>> use USB OTG for Ethenet access? >>>>>>>>>>>> >>>>>>>>>>>> On Fri, Sep 25, 2009 at 12:05 AM, sany <[email protected] >>>>>>>>>>>> > wrote: >>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Hello all, >>>>>>>>>>>>> >>>>>>>>>>>>> Has anyone been able to enable the ethernet interface on >>>>>>>>>>>>> embinux >>>>>>>>>>>>> kernel? >>>>>>>>>>>>> >>>>>>>>>>>>> Plzzzzzz help!!!!!!!! >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> With Regards, >>>>>>>>>>>> Kaushik Prajapati >>>>>>>>>>>> Grad. Student >>>>>>>>>>>> San Jose State Uni. >>>>>>>>>>>> 408-821-5891 >>>>>>>>>>>> Pablo >>>>>>>>>>>> Picasso<http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html> >>>>>>>>>>>> - "Computers are useless. They can only give you answers." >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> With Regards, >>>>>>>>>> Kaushik Prajapati >>>>>>>>>> Grad. Student >>>>>>>>>> San Jose State Uni. >>>>>>>>>> 408-821-5891 >>>>>>>>>> Samuel >>>>>>>>>> Goldwyn<http://www.brainyquote.com/quotes/authors/s/samuel_goldwyn.html> >>>>>>>>>> - "I'm willing to admit that I may not always be right, but I am >>>>>>>>>> never >>>>>>>>>> wrong." >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> With Regards, >>>>>>>>> Kaushik Prajapati >>>>>>>>> Grad. Student >>>>>>>>> San Jose State Uni. >>>>>>>>> 408-821-5891 >>>>>>>>> Joan >>>>>>>>> Crawford<http://www.brainyquote.com/quotes/authors/j/joan_crawford.html> >>>>>>>>> - "I, Joan Crawford, I believe in the dollar. Everything I earn, I >>>>>>>>> spend." >>>>>>>>> >>>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> With Regards, >>>>>>> Kaushik Prajapati >>>>>>> Grad. Student >>>>>>> San Jose State Uni. >>>>>>> 408-821-5891 >>>>>>> Charles de >>>>>>> Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html> >>>>>>> - "The better I get to know men, the more I find myself loving dogs." >>>>>>> >>>>>>> >>>>> >>>>> >>>>> -- >>>>> With Regards, >>>>> Kaushik Prajapati >>>>> Grad. Student >>>>> San Jose State Uni. >>>>> 408-821-5891 >>>>> Ted Turner<http://www.brainyquote.com/quotes/authors/t/ted_turner.html> - >>>>> "Sports is like a war without the killing." >>>>> >>>>> >>>>> >>>>> >>>>> >>> >>> >>> -- >>> With Regards, >>> Kaushik Prajapati >>> Grad. Student >>> San Jose State Uni. >>> 408-821-5891 >>> Marie von >>> Ebner-Eschenbach<http://www.brainyquote.com/quotes/authors/m/marie_von_ebnereschenbac.html> >>> - "Even a stopped clock is right twice a day." >>> >>> >>> >>> >>> > > > -- > With Regards, > Kaushik Prajapati > Grad. Student > San Jose State Uni. > 408-821-5891 > Charles de > Gaulle<http://www.brainyquote.com/quotes/authors/c/charles_de_gaulle.html> - > "The better I get to know men, the more I find myself loving dogs." > > > > --~--~---------~--~----~------------~-------~--~----~ unsubscribe: [email protected] website: http://groups.google.com/group/android-porting -~----------~----~----~----~------~----~------~--~---
