in gingerbread ttyS changed to ttyO Hedwin
On Fri, Jul 15, 2011 at 5:44 PM, Manish Shakya <[email protected]>wrote: > Right now I am trying to move from linux kernel 2.6.32 to 2.6.37 and use > gingerbread 2.3.4. > > With linux kernel 2.6.32, froyo and gb 2.3.3 are working fine. I used same > uboot arg as in earlier mail. > > On Fri, Jul 15, 2011 at 11:22 AM, hedwin <[email protected]> wrote: > >> Do you use froyo or gingerbread? >> >> >> >> On Fri, Jul 15, 2011 at 3:57 PM, manish shakya <[email protected]>wrote: >> >>> Yes, Both console and android.console is pointing to correct serial >>> device i.e. ttyS2. >>> >>> My uboot args is >>> >>> console=ttyS2,115200n8 androidboot.console=ttyS2 root=/dev/mmcblk0p2 rw >>> rootfstype=ext3 rootwait init=/init vram=12M >>> omapfb.mode=dvi:[email protected]_disp=lcd43 >>> >>> Isn't this correct? >>> >>> >>> On Fri, Jul 15, 2011 at 5:44 AM, hedwin <[email protected]> wrote: >>> > >>> > Check if console and android.console point to the correct serial >>> device. >>> > Both a kernel parameters sent by u-boot. >>> > >>> > Cheers, >>> > >>> > Hedwin >>> > >>> > On Thu, Jul 14, 2011 at 9:45 PM, Manish Shakya < >>> [email protected]> wrote: >>> >> >>> >> Hi , >>> >> >>> >> I am wondering what are the changes to be made if I have to make to >>> port rowboat to gumstix overo module. >>> >> >>> >> I did following things but it didn't worked. :-( >>> >> I made change in config file , board-overo.c and also added LCD >>> driver. Compilation went fine with out errors. >>> >> But when I tried to run the image. It show following log and gets >>> stuck. >>> >> >>> >> 2731240 bytes read >>> >> ## Booting kernel from Legacy Image at 82000000 ... >>> >> Image Name: Linux-2.6.37-g06ebbba >>> >> Image Type: ARM Linux Kernel Image (uncompressed) >>> >> Data Size: 2731176 Bytes = 2.6 MiB >>> >> Load Address: 80008000 >>> >> Entry Point: 80008000 >>> >> Verifying Checksum ... OK >>> >> Loading Kernel Image ... OK >>> >> OK >>> >> >>> >> Starting kernel ... >>> >> >>> >> Uncompressing Linux... done, booting the kernel. >>> >> >>> >> >>> >> -- >>> >> Manish Shakya >>> >> http://www.manishshakya.com.np >>> >> >>> >> -- >>> >> unsubscribe: [email protected] >>> >> website: http://groups.google.com/group/android-porting >>> > >>> >>> >>> >>> -- >>> >>> Manish Shakya >>> http://www.manishshakya.com.np >>> http://secs.oakland.edu/~ganesan/iMX/ >>> >> >> > > > -- > Manish Shakya > http://www.manishshakya.com.np > http://secs.oakland.edu/~ganesan/iMX/ > -- unsubscribe: [email protected] website: http://groups.google.com/group/android-porting
