Marcin Juszkiewicz <[EMAIL PROTECTED]> writes: > Dnia Tuesday 04 of March 2008, Sergei Organov napisał: >> Hello, >> >> I'm trying to boot hx2790 using CF card, HaRET, and images taken from >> http://www.angstrom-distribution.org/unstable/autobuild/hx2000/. >> >> The kernel starts to boot, but then fails with: >> >> ... >> Waiting 3sec before mounting root device... >> pccard: PMCIA card inserted into slot 0 >> pcmcia: registering new device pcmcia0.0 >> pccard: PMCIA card inserted into slot 1 >> pcmcia: registering new device pcmcia1.0 >> VFS: Cannot open root device "hda2" or unknown-block (0,0) >> Please append a correct "root=" boot option > > Card was not detected. Show 'pccardctl ident' output when card is > inserted.
I've managed to go further with boot, but from SD card. I'm loading exactly the same kernel as above, but now I get Angstrom splash screen with a progress bar that after some time disappears and leaves me at text screen (even if I use x11-image-hx2000.tar.gz). If I now insert those CF card I was trying to boot from, the following appears on the screen: pccard: PMCIA card inserted into slot 1 pcmcia: registering new device pcmcia1.0 hda: SILICONSYSTEMS INC 512MB, ATA DISK drive ide0 at 0xC4880000-0xC4880007, 0xC488000e on irq 43 hda: max request size: 128KiB hda: 1019088 sectors (521 MB) w/0KiB Cache, CHS=1011/16/63 hda: hda1 hda2 ide-cs: hda: Vpp = 0.0 So, the card is recognized by the kernel. Why it is not detected at boot-time then? In addition I've tried to build images myself (from the development branch). The linux-rp-2.6.23 kernel doesn't compile with the following error: arch/arm/mach-pxa/hx2750.c:446: error: ‘pxa_init_irq’ undeclared here (not in a function) The linux-rp-2.6.24 kernel compiles but oopses at boot time. Are any images out there that are known to work on hx2790 or hx2750? -- Sergei. _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
