On Tue, 13 Feb 2001 21:29:34 -0500, Glenn McCorkle wrote:
> On Mon, 12 Feb 2001 12:37:33 +0000, "Edenyard" <[EMAIL PROTECTED]> wrote:
>> On Sat, 10 Feb 2001 22:33:41 -0500, Glenn wrote:
>>> It's possible that your friend's ISP has switched to "dynamic DNS assignment"
>>> (which EPPPD.EXE does not support)
>>> If you find that this is what has happened:
>>> You can switch-over to LSPPP.EXE as the packet driver.
>>> (Lsppp *does* support dynamic DNS)
>> Is there an 'How-To' or idiot's guide for getting and installing
>> LSPPP? I seem to be up against dynamic-DNS ISPs, too!
> No problem.
> Here's the D/L page for Lsppp...
> http://members.tripod.com/~ladsoft/lsppp/index.htm
> Once you've got Lsppp.zip and unzipped it, here's how
> to setup Arachne to use it.
> 1) rename lsppp.exe to lspppd.exe and place it in your
> arachne_main_directory.
> (in my case it becomes l:\arachne\lspppd.exe)
> 2) use these settings in arachne.cfg
> [profile]
> Profile lspppd.ACF
> Connection @lspppd.exe>>PPP.LOG ;<-- don't need "lh" here
> because this is actually a
> "dummy line" (lspppd.exe will actually be
> loaded when the Dialer line is executed)
> [dialer]
> Dialer @lh lspppd.exe ;<-- will load low if too little
> upper mem is available
> UseTerminal No ;<-- must be "No" (lsppp won't dial
> if we use the terminal (miniterm.exe)
> Autologin Yes ;<-- can also try -- NO
> WaitFor1 ;<-- all waifor
> Response1 ;<-- and response
> WaitFor2 ;<-- settings
> Response2 ;<-- must be
> WaitFor3 ;<-- left blank
> Response3 ;<-- when Autologin is "Yes"
> PPPusername ;<-- Also must be left
> PPPpassword ;<-- blank when Autologin is "Yes"
> [tcp/ip]
> IP_Address PPP ;<-- can also try "BOOTP"
> (however, with BOOTP the online timer won't work)
> IP_Grab IP address set to ;<-- can be anything you like)
> NameServer ;<-- leave both
> AltNameServer ;<-- nameservers blank
> 3) before starting Arachne, run setlsppp.bat to place the needed
> settings in the lsppp environment variable
> --- setlsppp.bat ---
> set lsppp=/M:at&fs7=90s11=50 /B:115200 /P:*** /U:glennmcc /d:3306298686
> rem -- change^^^^^^^^^^^^^^^^^^^^^^^^^ to your modem settings
> rem -------- replace with your password ^^^ and^^^^^^^^ username ----
> rem ---------------------------- change to your dialup P# ^^^^^^^^^^^^^
> ____________________
> That's all there is to it. ;-)
> 1,2,3... your're online with Arachne/Lsppp
> --
> Glenn
> http://arachne.cz/
> http://freedos-32.sourceforge.net/
> http://www.delorie.com/listserv/mime/
> http://www.angelfire.com/id/glenndoom/download.htm
Sam Ewalt
Croswell, Michigan, USA
-user of The Arachne Browser - http://arachne.cz/
-- Arachne V1.70;rev.3, NON-COMMERCIAL copy, http://arachne.cz/
