On Sun, 18 Feb 2001 13:26:35 -0500, Sam Ewalt wrote:
> On Tue, 13 Feb 2001 21:29:34 -0500, Glenn McCorkle wrote:
>> 3) before starting Arachne, run setlsppp.bat to place the needed
>> settings in the lsppp environment variable
>> --- setlsppp.bat ---
>> set lsppp=/M:at&fs7=90s11=50 /B:115200 /P:*** /U:glennmcc /d:3306298686
>> rem -- change^^^^^^^^^^^^^^^^^^^^^^^^^ to your modem settings
>> rem -------- replace with your password ^^^ and^^^^^^^^ username ----
>> rem ---------------------------- change to your dialup P# ^^^^^^^^^^^^^
>> ____________________
>> That's all there is to it. ;-)
>> 1,2,3... your're online with Arachne/Lsppp
> Glenn, I'm having trouble getting this to dial. The problem is the
> /d switch. I believe the first three digits after the colon are
> instructions to the program. Is that right? And only the last seven
> digits are the phone number. Correct?
Nope, the whole thig is the P#
(330 is my area code)
> I'm not getting a dial tone
> before it gives up and dumps me back to the dial page. Then it redials
> and not getting a dial tone right away dumps me back to the dial
> page. And so on. The error message flashes by so quick that I can't read
> it. Something about a comma being needed. Maybe it's comma and then
> the phone number. Like this /d:,6298686
> I tried increasing the first digit to five, but that didn't help.
If you don't need to first dial the area code and your
dialup # is 555-1212
Then use... /d:5551212
--
Glenn
http://arachne.cz/
http://freedos-32.sourceforge.net/
http://www.delorie.com/listserv/mime/
http://www.angelfire.com/id/glenndoom/download.htm
