At 06:40 PM 12/9/01 -0500, you wrote: >On Sun, 09 Dec 2001 14:01:52 -0500, Michael Hildenbrand wrote: > > > I recently purchased the above modem (has the brand name Actiontec on the >[deletia] > >Does it have jumpers that you have to set on the modem itself?
Yes. >Did it come with some documentation about how to set the jumpers? yep, used them. >What Com port and Irq are you setting it up for? I've set it for everything. I have hardcoms 1-3, so this one has been set at com4. Of course, in my frustration, I tried 1-3 as well, as well as all of the possible IRQs. also tried pulling it and setting it in other slots in the motherboard. >Did you have a modem in this computer before? If so what was it >set up for in terms of port and irq? Yep, worked real well, too. Nice Practical modem, 14.4. Don't remember what the settings came out to. Arachne recognized it and set it up. Arachne doesn't recognize this, no matter what I set it at. 8-( I have used both MSD and Manifest to check for open ports and IRQ's. I was hoping someone had experience with this particular modem. Don't know if I'll ever trust an AT&T spin-off again! Used to work for them, should have known. 8-) Michael >Sam Ewalt >Croswell, Michigan, USA >-- Arachne V1.70;rev.3, NON-COMMERCIAL copy, http://arachne.cz/
