Hi Altin, You're exactly right. I'm sorry I didn't confirm that before. I'm looking into this right now and I'll upload the new .po file soon. Cheers, Alexei
Director of Web Development - Farallon Geographics, Inc. - 971.227.3173 On Wed, Jun 24, 2015 at 9:06 AM, Altin Ukshini <[email protected]> wrote: > Hi Alexei, > > I apologize, I missed a comma in my question, and that must have confused > you. > > We saw those strings, but those are only about django (django.po file), > strings that are part of the arches platform which runs on django. I was > talking about the arches strings (just like the ones I referred to with the > link of arches 1 in transifex). > > I believe there must be more than 40 strings in the whole platform? > > Let me look at the source code, maybe I can find the localization files in > there and then just ask you to upload them in transifex. > > Best, > Altin > > Sent from my phone. Please excuse any typos. > On Jun 24, 2015 5:39 PM, "Alexei Peters" <[email protected]> wrote: > >> Hi Altin, >> I think you can find what you want here: >> https://www.transifex.com/projects/p/arches3/translate/#sq/$/51026898 >> If that's not right please let me know. >> Cheers, >> Alexei >> >> >> Director of Web Development - Farallon Geographics, Inc. - 971.227.3173 >> >> On Wed, Jun 24, 2015 at 12:20 AM, Altin Ukshini <[email protected]> >> wrote: >> >>> Hey Alexei, >>> >>> Thanks for helping! >>> >>> We plan to use the official code only (sq). >>> I see you only uploaded the django.po file, but that is not all right? >>> >>> We need to translate the arches strings, where can we find those? >>> Something like: >>> https://www.transifex.com/projects/p/arches-1/viewstrings/#de/en-usjson-2/19202404 >>> >>> Thanks, >>> Altin >>> >>> -- >>> *Altin Ukshini* >>> *President of the Executive Board* >>> >>> >>> *FLOSSK (Free Libre Open Source Software Kosova)* >>> +386 (0) 49 199 992 | [email protected] | about.me/altinukshini >>> >>> Latest project: >>> >>> * <http://prishtinahackerspace.org>* >>> >>> On Tue, Jun 23, 2015 at 7:27 PM, Alexei Peters <[email protected]> >>> wrote: >>> >>>> Hi Altin, >>>> I've added Arianit to the Transifex site. I also noticed that 2 >>>> Albanian language codes we're requested (sq, sq_AL). Are you planning on >>>> using both forms or can we remove one? >>>> I've added the required resources. Let me know if you need anything >>>> else. >>>> Cheers, >>>> Alexei >>>> >>>> >>>> Director of Web Development - Farallon Geographics, Inc. - 971.227.3173 >>>> >>>> On Tue, Jun 23, 2015 at 12:13 AM, Altin Ukshini < >>>> [email protected]> wrote: >>>> >>>>> Hey Alexei, >>>>> >>>>> Thanks for helping, I see there are no resources for translation, >>>>> should I go ahead and add them, or you were planning to do that? >>>>> >>>>> Can you please also add my friend Arianit: [email protected] >>>>> >>>>> Best, >>>>> Altin >>>>> >>>>> -- >>>>> *Altin Ukshini* >>>>> *President of the Executive Board* >>>>> >>>>> >>>>> *FLOSSK (Free Libre Open Source Software Kosova)* >>>>> +386 (0) 49 199 992 | [email protected] | about.me/altinukshini >>>>> >>>>> Latest project: >>>>> >>>>> * <http://prishtinahackerspace.org>* >>>>> >>>>> On Tue, Jun 23, 2015 at 12:48 AM, Alexei Peters <[email protected]> >>>>> wrote: >>>>> >>>>>> Hi Altin, >>>>>> >>>>>> There is a transifex project for arches v3.0 at the following url. >>>>>> >>>>>> https://www.transifex.com/projects/p/arches3/ >>>>>> >>>>>> I added you to the project for both the Albanian core language (sq) >>>>>> as well as the dialect (sq_AL). >>>>>> >>>>>> Let me know if you need anything else. >>>>>> By the way, there is a package ( >>>>>> https://www.caktusgroup.com/blog/2013/04/25/managing-django-translations-transifex/) >>>>>> that integrate django (the platform Arches uses) and Transifex that >>>>>> should >>>>>> help smooth the process of managing the .po files. >>>>>> Hope that helps, >>>>>> Alexei >>>>>> >>>>>> >>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>> 971.227.3173 >>>>>> >>>>>> On Mon, Jun 22, 2015 at 10:14 AM, Altin Ukshini < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> Hey there, >>>>>>> >>>>>>> Congrats on rolling out the Arches v3.0 >>>>>>> >>>>>>> My team and I are willing to translate it into Albanian. >>>>>>> So far I only found this link for Arches translation and I believe >>>>>>> it's outdated: https://www.transifex.com/projects/p/arches-1/ >>>>>>> >>>>>>> Can you guys assist on this? - Is there any other way rather than >>>>>>> the link above, send us the .po files or create a new project in >>>>>>> transifex? >>>>>>> >>>>>>> Cheers, >>>>>>> Altin >>>>>>> >>>>>>> -- >>>>>>> *Altin Ukshini* >>>>>>> *President of the Executive Board* >>>>>>> >>>>>>> >>>>>>> *FLOSSK (Free Libre Open Source Software Kosova)* >>>>>>> +386 (0) 49 199 992 | [email protected] | >>>>>>> about.me/altinukshini >>>>>>> >>>>>>> Latest project: >>>>>>> >>>>>>> * <http://prishtinahackerspace.org>* >>>>>>> >>>>>>> On Fri, Dec 12, 2014 at 9:09 PM, Altin Ukshini < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> Hey David, >>>>>>>> >>>>>>>> Thanks a lot for the details. >>>>>>>> Is there any beta/alpha v3.0 available online for testing? >>>>>>>> >>>>>>>> Thanks, >>>>>>>> Altin >>>>>>>> >>>>>>>> -- >>>>>>>> *Altin Ukshini* >>>>>>>> *President of the Executive Board* >>>>>>>> >>>>>>>> >>>>>>>> *FLOSSK (Free Libre Open Source Software Kosova)* >>>>>>>> +386 (0) 49 199 992 | [email protected] | >>>>>>>> about.me/altinukshini >>>>>>>> >>>>>>>> Latest project: >>>>>>>> >>>>>>>> * <http://prishtinahackerspace.org>* >>>>>>>> >>>>>>>> On Fri, Oct 3, 2014 at 5:07 AM, David Myers <[email protected]> >>>>>>>> wrote: >>>>>>>>> >>>>>>>>> Hi Altin >>>>>>>>> >>>>>>>>> I thought I would add a few things to what Alexei has said. >>>>>>>>> Regarding translation of the user interface, if you haven't already >>>>>>>>> seen it >>>>>>>>> I would recommend looking at the Arches System Concept Glossary at >>>>>>>>> http://archesproject.org/glossary/ >>>>>>>>> >>>>>>>>> And regarding your question "is there a full list of those >>>>>>>>> Resource Types that we could translate and use for our monuments", I >>>>>>>>> wonder >>>>>>>>> whether you might be referring to the controlled vocabularies within >>>>>>>>> Arches >>>>>>>>> for populating dropdown values within data fields. Examples in Arches >>>>>>>>> v. >>>>>>>>> 2.0 include Architectural Heritage Type and Cultural Period Type. If >>>>>>>>> so, >>>>>>>>> then I should first say that all controlled vocabularies are >>>>>>>>> completely >>>>>>>>> configurable according to the specific needs of a given Arches >>>>>>>>> implementation. In fact, we expect that many or most of the default >>>>>>>>> authority files that come with Arches will need to be modified to >>>>>>>>> make them >>>>>>>>> relevant to a given implementation. >>>>>>>>> >>>>>>>>> >>>>>>>>> For the current version of Arches (2.0), I would recommend reading >>>>>>>>> in the Installation Guide, within the section of "The Core Data >>>>>>>>> Standard >>>>>>>>> Package," the subsection called "Authority Documents." Within that >>>>>>>>> subsection there is a topic called "Modifying the Default Authority >>>>>>>>> Files" >>>>>>>>> that will explain how to configure the authority files (which are CSV >>>>>>>>> files) to meet your own needs, whether by modifying the default >>>>>>>>> authority >>>>>>>>> files or replacing them completely. >>>>>>>>> >>>>>>>>> >>>>>>>>> I should also mention that Arches version 3.0 will have a >>>>>>>>> significant new feature called the Reference Data Manager (RDM) that >>>>>>>>> will >>>>>>>>> enable the management of all controlled vocabularies through the >>>>>>>>> Arches >>>>>>>>> user interface rather than having to go through the process of >>>>>>>>> modifying >>>>>>>>> CSV files for each authority document. This will make the >>>>>>>>> configuration >>>>>>>>> process much easier. There are a number of other great technical >>>>>>>>> advantages >>>>>>>>> of the RDM which I won't go into now. >>>>>>>>> >>>>>>>>> Best wishes, >>>>>>>>> >>>>>>>>> >>>>>>>>> David Myers >>>>>>>>> Arches Project Team >>>>>>>>> >>>>>>>>> >>> On 10/2/2014 at 10:01 AM, in message < >>>>>>>>> ca+zlqy-k53jtjpajuzmastlvuh4x_5fzhv2sghugbzsofae...@mail.gmail.com>, >>>>>>>>> Alexei Peters <[email protected]> wrote: >>>>>>>>> >>>>>>>>> Hi Altin, >>>>>>>>> >>>>>>>>> >>>>>>>>> Here are the steps you'd need to take to translate the site. >>>>>>>>> First and foremost, the strings on the Transifex site are only a >>>>>>>>> subset of the strings used in the actual site. For a complete >>>>>>>>> translation >>>>>>>>> you'd need to go to the effort of locating the remaining strings and >>>>>>>>> uploading them to Transifex. >>>>>>>>> Translate all the strings on the Transifex site >>>>>>>>> Download the now translated strings from Transifex and write a >>>>>>>>> script to add those strings into the i18n table in the database >>>>>>>>> As you can see, translating the site isn't a trivial task, but >>>>>>>>> it's doable. >>>>>>>>> >>>>>>>>> >>>>>>>>> As to the question of Resource Types, Arches by itself doesn't >>>>>>>>> supply the types of resources it manages. It's the package that >>>>>>>>> handles >>>>>>>>> that. That's why you didn't see any resource types until you loaded >>>>>>>>> the CDS >>>>>>>>> package. >>>>>>>>> An alternative would be to create your own package and customize >>>>>>>>> it to your liking (you can reference the CDS package as a guide). >>>>>>>>> >>>>>>>>> >>>>>>>>> Btw, I'd be remiss if I didn't mention that there is currently an >>>>>>>>> effort to deliver Arches v3. This version of Arches which should be >>>>>>>>> available early next year (Jan-Feb) is an huge departure from v2. >>>>>>>>> Particularly in the way the site can be localized. Packages will be >>>>>>>>> structured very similarly, but the UI will be completely re-imagined >>>>>>>>> using >>>>>>>>> Bootstrap and server-side templates as opposed to using the ExtJS >>>>>>>>> client-side widgets that are used currently. >>>>>>>>> >>>>>>>>> >>>>>>>>> Hope that helps some. >>>>>>>>> >>>>>>>>> >>>>>>>>> Cheers, >>>>>>>>> Alexei >>>>>>>>> >>>>>>>>> >>>>>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>>>>> 971.227.3173 >>>>>>>>> >>>>>>>>> On Wed, Oct 1, 2014 at 2:09 AM, Altin Ukshini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Alexei, >>>>>>>>> >>>>>>>>> I just did a re-install from scratch. I think I missed a step >>>>>>>>> somewhere - Maybe when I wrote the database password, I must have >>>>>>>>> written >>>>>>>>> the system user password... not sure. >>>>>>>>> >>>>>>>>> Can you please guide me on the translation procedure a bit. I >>>>>>>>> already requested for the Albanian translation on Transifex... >>>>>>>>> And how about the Resource Types? I didn't get any Resource Types >>>>>>>>> installed by defaul without including the CDS package from the >>>>>>>>> installation >>>>>>>>> guide. >>>>>>>>> >>>>>>>>> Is there a way to add them separately without the CDS package, and >>>>>>>>> is there a full list of those Resource Types that we could translate >>>>>>>>> and >>>>>>>>> use for our monuments ? >>>>>>>>> >>>>>>>>> Thanks, >>>>>>>>> Altin >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Altin UkshiniPresident of the Executive Board >>>>>>>>> >>>>>>>>> FLOSSK (Free Libre Open Source Software Kosova) >>>>>>>>> >>>>>>>>> >>>>>>>>> +386 (0) 49 199 992 ( tel:%2B386%20%280%29%2049%20199%20992 ) | >>>>>>>>> [email protected] | about.me/altinukshini >>>>>>>>> >>>>>>>>> >>>>>>>>> Latest project: >>>>>>>>> >>>>>>>>> >>>>>>>>> ( http://prishtinahackerspace.org ) >>>>>>>>> >>>>>>>>> >>>>>>>>> On Wed, Oct 1, 2014 at 6:38 AM, Alexei Peters <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> That's great to hear Altin! Could you share with the group what >>>>>>>>> the issue was and it resolution? >>>>>>>>> Cheers, >>>>>>>>> Alexei >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>>>>> 971.227.3173 ( tel:971.227.3173 ) >>>>>>>>> >>>>>>>>> On Tue, Sep 30, 2014 at 12:31 AM, Altin Ukshini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Yes I did. >>>>>>>>> I'm looking forward now to start the Albanian translation and will >>>>>>>>> need to understand the Monument Types which need to be added by >>>>>>>>> importing >>>>>>>>> CDS data only? >>>>>>>>> Thanks, >>>>>>>>> Altin >>>>>>>>> >>>>>>>>> >>>>>>>>> Sent from my phone. Please excuse any typos. >>>>>>>>> On Sep 30, 2014 6:47 AM, "Alexei Peters" <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Altin, >>>>>>>>> Sorry for not getting back to you sooner. Have you resolved this >>>>>>>>> error? >>>>>>>>> Cheers, >>>>>>>>> Alexei >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>>>>> 971.227.3173 ( tel:971.227.3173 ) >>>>>>>>> >>>>>>>>> On Thu, Sep 25, 2014 at 12:41 PM, Altin Ukshini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Ok, >>>>>>>>> >>>>>>>>> I'm almost done, but got stuck here (pic attached) >>>>>>>>> >>>>>>>>> The loading bar keeps loading, and I think that's bcs of these >>>>>>>>> errors shown in the pic. >>>>>>>>> >>>>>>>>> Any idea ? >>>>>>>>> >>>>>>>>> Altin >>>>>>>>> _ >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Altin UkshiniPresident of the Executive Board >>>>>>>>> >>>>>>>>> FLOSSK (Free Libre Open Source Software Kosova) >>>>>>>>> >>>>>>>>> >>>>>>>>> +386 (0) 49 199 992 ( tel:%2B386%20%280%29%2049%20199%20992 ) | >>>>>>>>> [email protected] | about.me/altinukshini >>>>>>>>> >>>>>>>>> >>>>>>>>> Latest project: >>>>>>>>> >>>>>>>>> >>>>>>>>> ( http://prishtinahackerspace.org ) >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, Sep 25, 2014 at 6:20 PM, Alexei Peters <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Altin, >>>>>>>>> Can you verify that you have these files on disk: >>>>>>>>> archesproject/virtualenv/ENV/bin/activatearchesproject >>>>>>>>> /db/Deployment Scripts/Restore.shThe ENV directory, Restore.sh and >>>>>>>>> many >>>>>>>>> other items are created when you run install_dependencies. >>>>>>>>> If your system doesn't have those items then install_dependencies >>>>>>>>> didn't run correctly. >>>>>>>>> >>>>>>>>> Cheers, >>>>>>>>> Alexei >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>>>>> 971.227.3173 ( tel:971.227.3173 ) >>>>>>>>> >>>>>>>>> On Thu, Sep 25, 2014 at 12:28 AM, Altin Ukshini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Yes I did run that Alexei! >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Altin UkshiniPresident of the Executive Board >>>>>>>>> >>>>>>>>> FLOSSK (Free Libre Open Source Software Kosova) >>>>>>>>> >>>>>>>>> >>>>>>>>> +386 (0) 49 199 992 ( tel:%2B386%20%280%29%2049%20199%20992 ) | >>>>>>>>> [email protected] | about.me/altinukshini >>>>>>>>> >>>>>>>>> >>>>>>>>> Latest project: >>>>>>>>> >>>>>>>>> >>>>>>>>> ( http://prishtinahackerspace.org ) >>>>>>>>> >>>>>>>>> >>>>>>>>> On Thu, Sep 25, 2014 at 9:04 AM, Alexei Peters <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Altin, >>>>>>>>> Have you run the script at >>>>>>>>> archesproject/install/install_dependencies.sh? >>>>>>>>> Try that if you haven't. >>>>>>>>> Cheers, >>>>>>>>> Alexei >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Director of Web Development - Farallon Geographics, Inc. - >>>>>>>>> 971.227.3173 ( tel:971.227.3173 ) >>>>>>>>> >>>>>>>>> On Wed, Sep 24, 2014 at 7:42 PM, Altin Ukshini < >>>>>>>>> [email protected]> wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> Hey Guys, >>>>>>>>> >>>>>>>>> I'm running an Ubuntu server 12.04, following this guide >>>>>>>>> http://arches.readthedocs.org/en/latest/05%20Installing%20Arches%20on%20Linux/ >>>>>>>>> >>>>>>>>> I initially got stuck at STEP 3 under: >>>>>>>>> source runserver.sh >>>>>>>>> >>>>>>>>> Ok, the first problem I have was that I was missing the following: >>>>>>>>> django.core.management that couldn't be imported. >>>>>>>>> >>>>>>>>> I decided to go ahead and do a pip install django v1.6 >>>>>>>>> >>>>>>>>> After that, source runserver.sh started but the following problem >>>>>>>>> shows up. >>>>>>>>> -bash: archesproject/virtualenv/ENV/bin/activate: No such file or >>>>>>>>> directory >>>>>>>>> >>>>>>>>> However the rest of the output is: >>>>>>>>> Validating models... >>>>>>>>> >>>>>>>>> 0 errors found >>>>>>>>> September 24, 2014 - 21:38:20 >>>>>>>>> Django version 1.6, using settings 'archesproject.settings' >>>>>>>>> Starting development server at http://127.0.0.1:8000/ >>>>>>>>> Quit the server with CONTROL-C. >>>>>>>>> >>>>>>>>> And when I follow STEP 4, I also get: >>>>>>>>> :~/arches-web/arches-arches-6127ba016596/archesproject/build$ >>>>>>>>> source install_arches_db.sh >>>>>>>>> -bash: virtualenv/ENV/bin/activate: No such file or directory >>>>>>>>> Setting up base path locations for db scripts >>>>>>>>> Traceback (most recent call last): >>>>>>>>> File "../manage.py", line 28, in <module> >>>>>>>>> execute_from_command_line(sys.argv) >>>>>>>>> File >>>>>>>>> "/usr/local/lib/python2.7/dist-packages/django/core/management/__init__.py", >>>>>>>>> line 399, in execute_from_command_line >>>>>>>>> utility.execute() >>>>>>>>> File >>>>>>>>> "/usr/local/lib/python2.7/dist-packages/django/core/management/__init__.py", >>>>>>>>> line 392, in execute >>>>>>>>> self.fetch_command(subcommand).run_from_argv(self.argv) >>>>>>>>> File >>>>>>>>> "/usr/local/lib/python2.7/dist-packages/django/core/management/__init__.py", >>>>>>>>> line 272, in fetch_command >>>>>>>>> klass = load_command_class(app_name, subcommand) >>>>>>>>> File >>>>>>>>> "/usr/local/lib/python2.7/dist-packages/django/core/management/__init__.py", >>>>>>>>> line 75, in load_command_class >>>>>>>>> module = import_module('%s.management.commands.%s' % (app_name, >>>>>>>>> name)) >>>>>>>>> File >>>>>>>>> "/usr/local/lib/python2.7/dist-packages/django/utils/importlib.py", >>>>>>>>> line >>>>>>>>> 40, in import_module >>>>>>>>> __import__(name) >>>>>>>>> File >>>>>>>>> "/home/prnhs-server1/arches-web/arches-arches-6127ba016596/archesproject/build/management/commands/build.py", >>>>>>>>> line 28, in <module> >>>>>>>>> from jsmin import jsmin >>>>>>>>> ImportError: No module named jsmin >>>>>>>>> Installing the database >>>>>>>>> chmod: cannot access `db/Deployment Scripts/Restore.sh': No such >>>>>>>>> file or directory >>>>>>>>> -bash: db/Deployment Scripts/Restore.sh: No such file or directory >>>>>>>>> deactivate: command not found >>>>>>>>> >>>>>>>>> >>>>>>>>> Can anyone help me figure this out? I'd very much appreciate any >>>>>>>>> help. >>>>>>>>> >>>>>>>>> Thanks in advance. >>>>>>>>> >>>>>>>>> P.S - Sorry for pasting text on the email... >>>>>>>>> >>>>>>>>> >>>>>>>>> Best, >>>>>>>>> Altin >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> -- To post, send email to [email protected]. To >>>>>>>>> unsubscribe, send email to >>>>>>>>> [email protected] ( mailto: >>>>>>>>> archesproject%[email protected] ). For more >>>>>>>>> information, visit >>>>>>>>> https://groups.google.com/d/forum/archesproject?hl=en >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "Arches Project" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> -- To post, send email to [email protected]. To >>>>>>>>> unsubscribe, send email to >>>>>>>>> [email protected]. For more information, >>>>>>>>> visit https://groups.google.com/d/forum/archesproject?hl=en >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "Arches Project" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>> >>>>>> >>>>> >>>> >>> >> -- -- To post, send email to [email protected]. To unsubscribe, send email to [email protected]. For more information, visit https://groups.google.com/d/forum/archesproject?hl=en --- You received this message because you are subscribed to the Google Groups "Arches Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
