Op dinsdag 18 november 2025 15:09:17 Midden-Europese standaardtijd schreef Ivan T. Ivanov: > > > > I booted the Leap 16.0 image and it took about 75 seconds to get the > > following text on the screen (I tried to upload the taken picture, but > > that message awaits moderator approval; all the time, in the right upper > > corner the U-boot > > logo showed): > Are you sure that you do not have network and/or USB boot enabled on > your RPi4? It will take “a lot" of time if you have this enabled, but > do not have DHCP and PXE server properly configured on your network. > I have no idea how to find out if that is the case. See output of the command: ~ # rpi-eeprom-update -l /usr/lib/firmware/raspberrypi/bootloader-2711/default/pieeprom-2025-05-08.bin or ~ # rpi-eeprom-config [all] BOOT_UART=0 WAKE_ON_GPIO=1 POWER_OFF_ON_HALT=0 BOOT_ORDER=0xf41
> Could you try with different SD card, and or update the EEPROM firmware? I already tried 2 different SD cards with Leap 16.0 and Tumbleweed. From the output above I conclude to have the latest eeprom firmware. > > Regards, > Ivan -- fr.gr. member openSUSE Freek de Kruijf
