Ok, Now you get registration, but still you cannot complete the call.
I don't see your dialplan on your files. However, the error log shows that ztdummy is not working, so there is no timming. Lsmod shows the module already installed? Carlos -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Zoltan Szecsei Sent: Friday, July 08, 2005 12:10 PM To: Time Bandit; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] IAXphone -> ip address -> extension number. Time Bandit wrote: >>*CLI> iax2 show peers >>Name/Username Host Mask Port Status >>z2 (Unspecified) (D) 255.255.255.255 0 Unmonitored >>z1 (Unspecified) (D) 255.255.255.255 0 Unmonitored >> >> > >>From this, you can see that none of the IAX phones are registered. > > OK, my iax.conf now has: [general] port=4569 bindaddr=0.0.0.0 bandwidth=medium disallow=LPC10 ;deny=all ;all0w=ulaw ;all0w=alaw ;all0w=gsm jitterbuffer=yes ; register => zoltan:[EMAIL PROTECTED] [z1] type=friend host=192.168.0.201 mailbox=1201 context=geograph callerid="Zoltan1" <201> [z2] type=friend host=192.168.0.202 mailbox=1202 context=geograph callerid="Zoltan2" <202> **********Then I load asterisk -vvvvvvvvvvvvvvvc: Asterisk Ready. *CLI> *CLI> iax2 show peers Name/Username Host Mask Port Status z2 192.168.0.202 (S) 255.255.255.255 4569 Unmonitored z1 192.168.0.201 (S) 255.255.255.255 4569 Unmonitored *CLI> *CLI> *CLI> iax2 show users Username Secret Authen Def.Context A/C z2 -no secret- 000000000000003 geograph No z1 -no secret- 000000000000003 geograph No *CLI> *CLI> stop now Beginning asterisk shutdown.... Executing last minute cleanups == Destroying any remaining musiconhold processes Asterisk cleanly ending (0). gl0:/home/zls # ********** Dialing from one phone ********************** on phone z1 I go offhook (hear dialtone); dial 202 and get enagaged tone. Similar if I dial 1, or 2, or 201, or 202 or anything in fact. If I go through the menu on the handset, these are the correct IP addresses of the phones. I can ping these phone IP addresses from any other PC on the network. *************My extensions.conf is:*************** [general] static=yes writeprotect=no [globals] CONSOLE=Console/dsp ; Console interface for demo IAXINFO=guest ; IAXtel username/password TRUNK=Zap/g2 ; Trunk interface TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0) [geograph] exten => s,1,Answer() exten => s,2,Playback(goodbye) exten => s,3,Hangup() exten => 201,1,Dial(IAX/z1,20,tr) exten => 202,1,Dial(IAX/z2,20,tr) exten => 1201,1,Dial(IAX/z1,20,tr) exten => 1202,1,Dial(IAX/z2,20,tr) ************ The last 4 entries in /var/log/asterisk/messages is: ************* Jul 8 17:57:32 WARNING[5219]: Unable to open pseudo channel for timing... Sound may be choppy. Jul 8 17:57:32 WARNING[5219]: Unable to open IAX timing interface: No such file or directory Jul 8 17:57:32 NOTICE[5219]: Unable to load config sip.conf, SIP disabled Jul 8 17:57:32 WARNING[5219]: Unable to get our IP address, Skinny disabled Jul 8 17:57:32 WARNING[5219]: Read error on sound device: Resource temporarily unavailable **************** My head is: ************ Bald!!!! please help. TIA, Zoltan _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
