|
Hello
I am using a Junghans quadBRI ISDN card and it is
loaded and working. In Asterisk if I connect to ISDN line it is detected
and tells me so.
In my zapata.conf I have
(abbreviated):
[channels]
switchtype=euroisdn
signalling = bri_cpe
context=default
group=1
channel => 1-2
;plus group 2 - 4
zaptel.conf:
loadzone=uk
defaultzone=uk # qozap span definitions # most of the values should be bogus because we are not really zaptel span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2
dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 Then in extensions.conf I have:
[default]
; this below for internal extensions - works
OK
exten =>
_2XX,1,Dial(SIP/${EXTEN},20,Ttm)
; for dialing outbound - over ISDN line - this bit
does not work
exten =>
_9XX.,2,Dial(ZAP/g1/${EXTEN},60)
exten => _9XX.,2,Hangup
Error I get is:
-- Executing
Dial("SIP/200-e433", "ZAP/g1/902088787367|60") in new stack
Jul 25 11:56:33 NOTICE[6723]: app_dial.c:777 dial_exec: Unable to create channel of type 'ZAP' == Everyone is busy/congested at this time -- Executing Hangup("SIP/200-e433", "") in new stack == Spawn extension (default, 902088787367, 2) exited non-zero on 'SIP/200-e433' I am dialing with sip phones. They work if
dialing extensions internally but not if try to dial outside - eg dial 9
followed by number.
What have I not done right?
Angus
|
_______________________________________________ Asterisk-Users mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
