Lets put the TDMoE aside for a minute... The same trunking could be achieved with SIP or IAX, could it not (with higher latency)?
The rest of the question remains - is there a way to get asterisk to output, bit for bit, on a t1 interface, the same data that is input on a remote asterisk box t1 interface - using any trunking protocol. This is what would be required to truly emulate a "signaling un-aware" point to point t1 like one that you would get from a telco if you ordered a point to point esf/b8zs t1 from A location to Z location. Pure circuit emulation - not ISDN/CAS/E&M signaled voice. Does that clarify the question at all? > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:asterisk-users- > [EMAIL PROTECTED] On Behalf Of Jean-Michel Hiver > Sent: Thursday, January 26, 2006 6:53 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] * point to point t1 solution? > > Damon Estep a écrit : > > >TDMoE would allow a T1 like connection only over the local Ethernet > segment, since it is not an IP technology it can not be router across ip > networks. > > > > > > You could use OpenVPN to create a virtual tap0 interface over IP, and > bridge that with your current ethX network. > > Cheers, > Jean-Michel. > > -- > Jean-Michel Hiver - http://ykoz.net/ > Découvrez la Réunion des Technologies IP & Telecom > TEL: +262 (0)262 55 03 98 - RCS 434 273 330 SAINT PIERRE > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > Asterisk-Users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
