Lachek Butalek wrote:
So I took a chance with an X100P knock-off on eBay. I'm running
Asterisk + FreePBX on a PowerMac G3 (beige desktop) using Slackintosh
10.2 and kernel 2.6.16.16 <http://2.6.16.16>. Everything has been fine
up until now.
I compile the 1.2.5 Zaptel drivers without a problem, get the udev
configuration in, modprobe zaptel, and finally modprobe wcfxo. At this
point, I get the message:
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
FATAL: Error running install command for wcfxo
dmesg gives me:
Zapata Telephony Interface Registered on major 196
Zaptel Version: 1.2.5 Echo Canceller: MG2
Failed to initailize DAA, giving up...
wcfxo: probe of 0000:00:0e.0 failed with error -5
syslog tells me:
May 25 21:28:20 asterisk kernel: Failed to initailize DAA, giving up...
May 25 21:28:20 asterisk kernel: wcfxo: probe of 0000:00:0e.0 failed
with error -5
ztcfg -vv says:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
and lspci -vv tells me this:
00:0e.0 Communication controller: Motorola: Unknown device 5608
Subsystem: Motorola: Unknown device 0000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B-
On an Intel machine, it reports a Tigerjet chip.
Looks as if you may have the wrong modem chip?
John Novack
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
