Yes, ASTERISK1 has 2x TDM400P and ASTERISK2 has 3 x100P cards in it. I'll try to dork with the timer, but as long as wcfxo or wcfxs is loaded shouldn't that take care of these issues?
----- Original Message ----- From: "Olle E. Johansson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 07, 2003 4:02 PM Subject: Re: [Asterisk-Users] Re: IAX2 trunking on one side only. > Louis-David Mitterrand wrote: > > On Thu, Nov 06, 2003 at 10:41:15PM -0500, Brian Schrock wrote: > > > >>Hello, > >> > >>I have searched google, read everything on the mailing list, read > >>/usr/src/asterisk/README.iax and /usr/src/asterisk/doc/iax.txt(?), asked on > >>the IRC channel and I cannot figure out what is wrong with my IAX2 trunk. > >> > >>Only asterisk2 of an <ASTERISK1>--LAN--<ASTERISK2>--PSTN will use IAX2 > >>trunking. If I do an "iax2 show trunk" on asterisk1 it says 0 calls on trunk > > > > > > Do you have a zaptel device on each side? AFAIR zaptel timing is > > required for trunking to work. > > > We have to rename "Zaptel timing" to "Asterisk timer", which is more correct > since there are several ways of getting a timer to work, only one of them > is by using Zaptel cards. > > http://www.voip-info.org/tiki-index.php?page=Asterisk+timer > > /Olle > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
