I sent this yesterday, but for some reawson it did not go through. Yes,
ASTERISK1 = 2x TDM400P ASTERISK2 = 3x X100P I still cannot get it working past that. Is there something screwey with the wcfxs drivers and Linux? ----- Original Message ----- From: "Louis-David Mitterrand" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, November 07, 2003 1:59 AM Subject: [Asterisk-Users] Re: IAX2 trunking on one side only. > On Thu, Nov 06, 2003 at 10:41:15PM -0500, Brian Schrock wrote: > > Hello, > > > > I have searched google, read everything on the mailing list, read > > /usr/src/asterisk/README.iax and /usr/src/asterisk/doc/iax.txt(?), asked on > > the IRC channel and I cannot figure out what is wrong with my IAX2 trunk. > > > > Only asterisk2 of an <ASTERISK1>--LAN--<ASTERISK2>--PSTN will use IAX2 > > trunking. If I do an "iax2 show trunk" on asterisk1 it says 0 calls on trunk > > Do you have a zaptel device on each side? AFAIR zaptel timing is > required for trunking to work. > > -- > If Galileo is the spark that lights up the gas giant Jupiter, turning it > into a second sun, that will be the last straw. We will then have no > choice but to make safety the number one priority at NASA. > -- falsification on /. > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
