|
Hello, I have the following setup: 1. Ubuntu Dapper Server 6.06 plus latest patches 2. Asterisk 1.2.11 3. libpri 1.2.3 4. Zaptel 1.2.8 5. Digium TDM22 (TDM400P) 6. Analog phone plugged in port 3 7. The wctdm, zaptel modules load at startup, I type
asterisk as root and it is activated. 8. I check the Channel Map and I have the following: Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels configured. I can ssh into the server and remotely connect to the
server. Great! The card is not connected to an outside line as of yet but I
have no dialtone on the phone. I spoke with a rep. at digium and was told a
dialtone should be there. Zaptel.conf : loadzone=us defaultzone=us fxoks=1,2 fxsks=3,4 Zapata.conf: ;FXS Modules signalling=fxo_ks channel => 1,2 ; ;FXO Modules signalling=fxs_ks channel => 3,4 I made sure the card is not sharing an IRQ, I checked
the hard drive and all is well. I load zttool and get the following: cat /proc/zaptel/* Span 1: WCTDM/0 "Wildcard TDM400P REV I Board
1" 1 WCTDM/0/0 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 Any suggestions? Ed |
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
