> Thanks for the reply. > > 1. My VAD is turned off (00140014), and it didn't help for that cut-off. I > am not sure if OutboundProxy has to be configured to have it working fine. > Or this just happened to me? What is your ATA's software? > > 2. I tried dtmfmode=inband on sip.conf, and dtmfmode=rfc2833. None worked. > As per ATA, it is by default using rfc2833. I tried setting it up as inband > by setting Audiomode, but nothing helped. I was thinking the * is ONLY > recognizing the DTMF if there is telco board installed. Is it? > > > ----- Original Message ----- > From: "Philipp von Klitzing" <[EMAIL PROTECTED]> > To: "Jess Magnaye" <[EMAIL PROTECTED]> > Sent: Tuesday, December 23, 2003 12:36 PM > Subject: Re: [Asterisk-Users] Fw: Questions and finding > > > > Hi! > > > > > 1.) First test > > > - ATA1 calls to ATA2. When voicemail starts playing, it just cuts-off > > > after 5-10seconds (consistently). > > > - Solution: I have to reconfigure ATA to use OutboundProxy to be > Asterisk > > > IP. > > > - Am I doing the right thing? > > > > Turn of silence detection / VAD. > > > > > Any solution to this one? > > > My thinking was that DTMF can only be detected by * > > > > Take a look at your SIP configuration and make sure you have the correct > > dtmfmode= set. Try different values if you continue to have trouble and > > configure your ATA accordingly. > > > > Cheers, Philipp > > > > >
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
