[Asterisk-Users] Fw: Questions and finding

[Jess Magnaye]

I installed * to primarily test its voicemail feature.  I installed it on a server WITHOUT any telco board (i.e., digium).  Installation looks ok, however I am having problems.   MY SETUP:   2xATAs are configured to use * as GkorProxy Asterisk is registered to my SER SIP/RTP Proxy   1.) First test - ATA1 calls to ATA2.  When voicemail starts playing, it just cuts-off after 5-10seconds (consistently).  - Solution: I have to reconfigure ATA to use OutboundProxy to be Asterisk IP. - Am I doing the right thing?   2.) Second test: - ATA1 calls ATA2 and left a message.  * sends an email to the owner of ATA2. - ATA2 retrieves the message by dialing the extension (i.e., exten=>9999,1,VoiceMailMain(123)) - VoiceMail prompts for password.  ATA2 keys in its pasword.  * doesn't reply and keeps on prompting for 5 times, until it disconnects:     -- Executing VoiceMailMain("SIP/6882332-6b3a", "123") in new stack     -- Playing 'vm-password' (language 'en')     -- Incorrect password '' for user '123' (context = <any>)     -- Playing 'vm-incorrect' (language 'en')     -- Playing 'vm-password' (language 'en')     -- Incorrect password '' for user '123' (context = <any>)     -- Playing 'vm-incorrect' (language 'en')     -- Playing 'vm-password' (language 'en') - Tried to change AudioMode of ATA, to use 0x00140014, 0x11241124, and default 0x00150015.  But there were no difference. - Tried to skip the password on *, using exten=>9999,1,VoiceMailMain(s123).  * prompted there are new messages, and instructions on how to retreive them.  Unfortunately, none  of the dtmf keys worked (1, #, etc).   Any solution to this one?   My thinking was that DTMF can only be detected by *   3.) How can I configure * to support the following setup.  I know * doesn't work 100% like softswitch, but maybe this type of connection is supported?    ATA -> * -> CiscoAS5300   ATA to *, is IP connection * to CiscoAS5300 is also IP connection     I appreciate your help.  Thank you.