> Hi! > > > 1. My VAD is turned off (00140014), and it didn't help for that cut-off. > > Then check if you have a firewall in between * and your ATA that closes > the port due to inactivity of your ATA. Also use "SIP DEBUG" in the CLI > to try to see a bit more of what is going on. You could also use Ethereal > to monitor the SIP traffic (or the rtp/UDP traffic). > > > am not sure if OutboundProxy has to be configured to have it working fine. > > Or this just happened to me? What is your ATA's software? > > I don't have such a device, in fact never had. :-)
MY ATA and * are sitting on the same LAN. So FW or NAT problem is not possible. This is also the reason why I commented out "nat=1" in the sip.conf. > > 2. I tried dtmfmode=inband on sip.conf, and dtmfmode=rfc2833. None worked. > > Note: inband only works with g.711 codec. Doesn't the ATA also offer > "info" as third dtmfmode option? Anyway, you might want to search the > mailing list for setup info, there are a lot of people around that use > it. > > > by setting Audiomode, but nothing helped. I was thinking the * is > > ONLY recognizing the DTMF if there is telco board installed. Is it? > > No no, * doesn't require any hardware to be installed. > LET ME TRY dtmfmode=info AND SEE WHAT HAPPENS NEXT. _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
