> [trunkgroups] > > [channels] > switchtype=qsig > context = from-pstn > group = 0 > signalling = pri_cpe > channel = 1-15,17-31,32-46,48-62,63-77,79-93,94-108,110-124
Everything after the channel line above will have no effect on the channels created by the above line. Thus the faxdetect=both below will not have any effect. > > usecallingpres=yes > sendcalleridafter = 2 > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > rxgain = 0.0 > txgain = 0.0 > group=1 > callgroup=1 > pickupgroup=1 > faxdetect=both > > #include /etc/asterisk/dahdi-channels.conf Please note that the include is part of the chan_dahdi.conf config file. > > Sawan > > On Fri, Jun 24, 2011 at 12:15 AM, Eric Wieling <ewiel...@nyigc.com> > wrote: > > > >> -----Original Message----- > >> From: asterisk-users-boun...@lists.digium.com > >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of > >> Sawan Vithlani > >> Sent: Thursday, June 23, 2011 10:12 AM > >> To: asterisk-users@lists.digium.com > >> Subject: [asterisk-users] Problem with detecting fax on > >> PRI/DAHDI channels > >> > >> Hello all, > >> > >> I am using call files to dial out to a set of PSTN numbers. > >> The calls are going out fine and being handled correctly by > >> the dial plan. > >> > >> The problem occurs when I accidentally call a fax machine. I > >> would expect the dial plan to pick this up and jump to the > >> "fax" extension in the current context. This is not happening. > >> > >> In the call file I send the call out via > >> Dial(DAHDI/g0/XXXXXXXX) and then it goes to my dial plan context: > >> > >> [SendCall] > >> exten => start,1,Answer() > >> same => n, Wait(5) > >> same => n, ..... ;; do some more stuff > >> > >> exten => fax,1,Verbose(got a Fax on ${EXTEN}) same =>n, Hangup() > >> > >> ;;;; > >> > >> I do get a message on the CLI telling me "Channel 63 > >> detected a CED tone from the network" but still no jumping to > >> the fax extension. > >> This is while dialplan is in the Wait(5). > >> > >> CLI> core show version > >> Asterisk 1.8.4.1-1digium1~natty built by pbuilder @ nighthawk on a > >> x86_64 running Linux on 2011-05-23 22:05:17 UTC > >> > >> ISDN lines connected via Digium TE412P card. > >> > >> I have "faxdetect = both" in chan_dahdi.conf in the general > >> section as well as specifically for the configured spans. > > > > Show us your chan_dahdi.conf Richard -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users