Same problem, you have these settings AFTER the channel => line, not before. Move the settings to BEFORE the channel => lines.
> -----Original Message----- > From: asterisk-users-boun...@lists.digium.com > [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of > Sawan Vithlani > Sent: Thursday, June 23, 2011 11:45 PM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [asterisk-users] Problem with detecting fax on > PRI/DAHDI channels > > hi, > > I am also setting faxdetect=both in the individual channels > in dahdi-channels.conf. > > ===snip=== > group=0,12 > context=from-pstn > switchtype = euroisdn > signalling = pri_cpe > channel => 1-15,17-31 > context = default > group = 63 > faxdetect = both > > ========= > > Sawan > On Fri, Jun 24, 2011 at 10:38 AM, Richard Mudgett > <rmudg...@digium.com> wrote: > >> [trunkgroups] > >> > >> [channels] > >> switchtype=qsig > >> context = from-pstn > >> group = 0 > >> signalling = pri_cpe > >> channel = 1-15,17-31,32-46,48-62,63-77,79-93,94-108,110-124 > > > > Everything after the channel line above will have no effect on the > > channels created by the above line. Thus the faxdetect=both below > > will not have any effect. > > > >> > >> usecallingpres=yes > >> sendcalleridafter = 2 > >> callwaitingcallerid=yes > >> threewaycalling=yes > >> transfer=yes > >> canpark=yes > >> cancallforward=yes > >> callreturn=yes > >> echocancel=yes > >> echocancelwhenbridged=yes > >> rxgain = 0.0 > >> txgain = 0.0 > >> group=1 > >> callgroup=1 > >> pickupgroup=1 > >> faxdetect=both > >> > >> #include /etc/asterisk/dahdi-channels.conf > > > > Please note that the include is part of the chan_dahdi.conf config > > file. > > > >> > >> Sawan > >> > >> On Fri, Jun 24, 2011 at 12:15 AM, Eric Wieling <ewiel...@nyigc.com> > >> wrote: > >> > > >> >> -----Original Message----- > >> >> From: asterisk-users-boun...@lists.digium.com > >> >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of > >> >> Sawan Vithlani > >> >> Sent: Thursday, June 23, 2011 10:12 AM > >> >> To: asterisk-users@lists.digium.com > >> >> Subject: [asterisk-users] Problem with detecting fax on > PRI/DAHDI > >> >> channels > >> >> > >> >> Hello all, > >> >> > >> >> I am using call files to dial out to a set of PSTN numbers. > >> >> The calls are going out fine and being handled correctly by the > >> >> dial plan. > >> >> > >> >> The problem occurs when I accidentally call a fax > machine. I would > >> >> expect the dial plan to pick this up and jump to the "fax" > >> >> extension in the current context. This is not happening. > >> >> > >> >> In the call file I send the call out via > >> >> Dial(DAHDI/g0/XXXXXXXX) and then it goes to my dial > plan context: > >> >> > >> >> [SendCall] > >> >> exten => start,1,Answer() > >> >> same => n, Wait(5) > >> >> same => n, ..... ;; do some more stuff > >> >> > >> >> exten => fax,1,Verbose(got a Fax on ${EXTEN}) same =>n, Hangup() > >> >> > >> >> ;;;; > >> >> > >> >> I do get a message on the CLI telling me "Channel 63 > detected a > >> >> CED tone from the network" but still no jumping to the fax > >> >> extension. > >> >> This is while dialplan is in the Wait(5). > >> >> > >> >> CLI> core show version > >> >> Asterisk 1.8.4.1-1digium1~natty built by pbuilder @ > nighthawk on a > >> >> x86_64 running Linux on 2011-05-23 22:05:17 UTC > >> >> > >> >> ISDN lines connected via Digium TE412P card. > >> >> > >> >> I have "faxdetect = both" in chan_dahdi.conf in the general > >> >> section as well as specifically for the configured spans. > >> > > >> > Show us your chan_dahdi.conf > > > > Richard > > > > -- > > > _____________________________________________________________________ > > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- > > New to Asterisk? Join us for a live introductory webinar > every Thurs: > > http://www.asterisk.org/hello > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by > http://www.api-digital.com -- New to Asterisk? Join us for a > live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users