Update on this: Solved by using the AMD app... Outbound calls to faxes detected reliably.
On Saturday, June 25, 2011, Eric Wieling <ewiel...@nyigc.com> wrote: > > Same problem, you have these settings AFTER the channel => line, not before. > Move the settings to BEFORE the channel => lines. > >> -----Original Message----- >> From: asterisk-users-boun...@lists.digium.com >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of >> Sawan Vithlani >> Sent: Thursday, June 23, 2011 11:45 PM >> To: Asterisk Users Mailing List - Non-Commercial Discussion >> Subject: Re: [asterisk-users] Problem with detecting fax on >> PRI/DAHDI channels >> >> hi, >> >> I am also setting faxdetect=both in the individual channels >> in dahdi-channels.conf. >> >> ===snip=== >> group=0,12 >> context=from-pstn >> switchtype = euroisdn >> signalling = pri_cpe >> channel => 1-15,17-31 >> context = default >> group = 63 >> faxdetect = both >> >> ========= >> >> Sawan >> On Fri, Jun 24, 2011 at 10:38 AM, Richard Mudgett >> <rmudg...@digium.com> wrote: >> >> [trunkgroups] >> >> >> >> [channels] >> >> switchtype=qsig >> >> context = from-pstn >> >> group = 0 >> >> signalling = pri_cpe >> >> channel = 1-15,17-31,32-46,48-62,63-77,79-93,94-108,110-124 >> > >> > Everything after the channel line above will have no effect on the >> > channels created by the above line. Thus the faxdetect=both below >> > will not have any effect. >> > >> >> >> >> usecallingpres=yes >> >> sendcalleridafter = 2 >> >> callwaitingcallerid=yes >> >> threewaycalling=yes >> >> transfer=yes >> >> canpark=yes >> >> cancallforward=yes >> >> callreturn=yes >> >> echocancel=yes >> >> echocancelwhenbridged=yes >> >> rxgain = 0.0 >> >> txgain = 0.0 >> >> group=1 >> >> callgroup=1 >> >> pickupgroup=1 >> >> faxdetect=both >> >> >> >> #include /etc/asterisk/dahdi-channels.conf >> > >> > Please note that the include is part of the chan_dahdi.conf config >> > file. >> > >> >> >> >> Sawan >> >> >> >> On Fri, Jun 24, 2011 at 12:15 AM, Eric Wieling <ewiel...@nyigc.com> >> >> wrote: >> >> > >> >> >> -----Original Message----- >> >> >> From: asterisk-users-boun...@lists.digium.com >> >> >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of >> >> >> Sawan Vithlani >> >> >> Sent: Thursday, June 23, 2011 10:12 AM >> >> >> To: asterisk-users@lists.digium.com >> >> >> Subject: [asterisk-users] Problem with detecting fax on >> PRI/DAHDI >> >> >> channels >> >> >> >> >> >> Hello all, >> >> >> >> >> >> I am using call files to dial out to a set of PSTN numbers. >> >> >> The calls are going out fine and being handled correctly by the >> >> >> dial plan. >> >> >> >> >> >> The problem occurs when I accidentally call a fax >> machine. I would >> >> >> expect the dial plan to pick this up and jump to the "fax" >> >> >> extension in the current context. This is not happening. >> >> >> >> >> >> In the call file I send the call out via >> >> >> Dial(DAHDI/g0/XXXXXXXX) and then it goes to my dial >> plan context: >> >> >> >> >> >> [SendCall] >> >> >> exten => start,1,Answer() >> >> >> same => n, Wait(5) >> >> >> same => n, ..... ;; do some more stuff >> >> >> >> >> >> exten => fax,1,Verbose(got a Fax on ${EXTEN}) same =>n, Hangup() >> >> >> >> >> >> ;;;; >> >> >> >> >> >> I do get a message on the CLI telling me "Channel 63 >> detected a >> >> >> CED tone from the network" but still no jumping to the fax >> >> >> extension. >> >> >> This is while dialplan is in the Wait(5). >> >> >> >> >> >> CLI> core show version >> >> >> Asterisk 1.8.4.1-1digium1~natty built by pbuilder @ >> nighthawk on a >> >> >> x86_64 running Linux on 2011-05-23 22:05:17 UTC > -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users