hi, I am also setting faxdetect=both in the individual channels in dahdi-channels.conf.
===snip=== group=0,12 context=from-pstn switchtype = euroisdn signalling = pri_cpe channel => 1-15,17-31 context = default group = 63 faxdetect = both ========= Sawan On Fri, Jun 24, 2011 at 10:38 AM, Richard Mudgett <rmudg...@digium.com> wrote: >> [trunkgroups] >> >> [channels] >> switchtype=qsig >> context = from-pstn >> group = 0 >> signalling = pri_cpe >> channel = 1-15,17-31,32-46,48-62,63-77,79-93,94-108,110-124 > > Everything after the channel line above will have no effect on the > channels created by the above line. Thus the faxdetect=both below > will not have any effect. > >> >> usecallingpres=yes >> sendcalleridafter = 2 >> callwaitingcallerid=yes >> threewaycalling=yes >> transfer=yes >> canpark=yes >> cancallforward=yes >> callreturn=yes >> echocancel=yes >> echocancelwhenbridged=yes >> rxgain = 0.0 >> txgain = 0.0 >> group=1 >> callgroup=1 >> pickupgroup=1 >> faxdetect=both >> >> #include /etc/asterisk/dahdi-channels.conf > > Please note that the include is part of the chan_dahdi.conf > config file. > >> >> Sawan >> >> On Fri, Jun 24, 2011 at 12:15 AM, Eric Wieling <ewiel...@nyigc.com> >> wrote: >> > >> >> -----Original Message----- >> >> From: asterisk-users-boun...@lists.digium.com >> >> [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of >> >> Sawan Vithlani >> >> Sent: Thursday, June 23, 2011 10:12 AM >> >> To: asterisk-users@lists.digium.com >> >> Subject: [asterisk-users] Problem with detecting fax on >> >> PRI/DAHDI channels >> >> >> >> Hello all, >> >> >> >> I am using call files to dial out to a set of PSTN numbers. >> >> The calls are going out fine and being handled correctly by >> >> the dial plan. >> >> >> >> The problem occurs when I accidentally call a fax machine. I >> >> would expect the dial plan to pick this up and jump to the >> >> "fax" extension in the current context. This is not happening. >> >> >> >> In the call file I send the call out via >> >> Dial(DAHDI/g0/XXXXXXXX) and then it goes to my dial plan context: >> >> >> >> [SendCall] >> >> exten => start,1,Answer() >> >> same => n, Wait(5) >> >> same => n, ..... ;; do some more stuff >> >> >> >> exten => fax,1,Verbose(got a Fax on ${EXTEN}) same =>n, Hangup() >> >> >> >> ;;;; >> >> >> >> I do get a message on the CLI telling me "Channel 63 >> >> detected a CED tone from the network" but still no jumping to >> >> the fax extension. >> >> This is while dialplan is in the Wait(5). >> >> >> >> CLI> core show version >> >> Asterisk 1.8.4.1-1digium1~natty built by pbuilder @ nighthawk on a >> >> x86_64 running Linux on 2011-05-23 22:05:17 UTC >> >> >> >> ISDN lines connected via Digium TE412P card. >> >> >> >> I have "faxdetect = both" in chan_dahdi.conf in the general >> >> section as well as specifically for the configured spans. >> > >> > Show us your chan_dahdi.conf > > Richard > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > New to Asterisk? Join us for a live introductory webinar every Thurs: > http://www.asterisk.org/hello > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users -- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users