Am Do, den 17.06.2004 schrieb Peter Svensson um 9:43: > On Thu, 17 Jun 2004, Wolfgang Pichler wrote: > > > ... on the card i can see the two leds pulsing red (i think thats the > > yellow alaram - or i am wrong) ? > > Are you sure it is not a red alarm? That would indicate a loss of link. > I think you can check with the command zttool. you are right - its a red alarm - zttool says "Red Alarm/Not Open" > > Are you sure the cables are correct? > Have you set the jumpers on the card to E1 and not left them on T1? The jumpers are on E1 - the cables should be ok (they are working with other hardware) - and the card is directly connected to a simens ULAF+ STU Desktop (can't really find much information about this device on the net) - which turns off a red led when i load the driver and do a ztcfg. > > I think the leds should turn green when the card senses a correct carrier > and framing on the lines. green is always a wounderful color ;-)
so, what else could cause this ? wolfgang _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
