|
The buffer is full on the 7960 because it
keeps the old software along with downloading the new software just incase the new software fails. What I have been doing is using a very generic
SIPDefault.cnf and that allows enough space to
download the upgrades. This is the SIPDefault.cnf
I use for upgrades. Once the
upgrade is done use your original SIPDefault. image_version:
"P0S3-04-4-00" #
Proxy Server proxy1_address:
"192.168.254.4" proxy6_port:"5060" From: Hello, I'm trying to upgrade my 7960G that I bought off ebay to
SIP 7.2 firmware. Apparently this phone had pretty old firmware on it...
it's using Application Load ID P003H310 (version 3.0.12 Call Manager). I've setup both a UNIX and Windows (SolarWinds) tftp
server, and acquired firmware images for SIP 3.2, 4.4, 5.3, 6.3, and
7.2. I set my OS79XX.txt contents to 8.3 filenames to
download P0S3-03-2-00.bin (renamed to 8.3 filename P0S30320.bin). The tftp server successfully logs the connection from the
phone, succesfully downloads OS79XX.txt, and then starts to download
P0S30320.bin. After 391168 bytes of download (the file is 409k), the
phone dumps the transfer. So I installed ethereal on my windows server. It
shows that at packet 769 the cisco phone reports "Disk Full". I looked into this and came up with these previous posts: However, since my phone firmware is so old I assume that I
might need SIP 2.3 firmware to get this going. In actuality, this is taking WAY more time than I had
anticipated, so finally I'm reaching out to anyone who has had old firmware
like mine (P003H310) and successfully upgraded it. Thank you! Andrew Edmond |
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
