Right you are! >From my dated 2000 firmware, using the UAL (at 125k-ish), the phone updated GREAT to 7.1 (and about to go to 7.2).
Thanks bkw! Andrew > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > Brian West > Sent: Tuesday, October 12, 2004 3:21 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error" > > > > I upgraded 6 7960G's the other week, all at the same time, all > > starting with year 2000 SCCP firmware on them. > > > > You cannot upgrade these phones directly to SIP7.2. > > Actually you can. You put in your OS79XX.TXT P003-07-2-00 > which is the UAL. The UAL is around 125k, then in your .cnf > files ie SIPDefault.cnf you put P0S3-07-2-00. The reason you > can't upgrade some older SCCP phones is the buffer in the > phone isn't large enough to take a load that's larger than > about 400K. You should be able to load the UAL without a > problem on most phones. I have done it more than a dozen > times without a problem. > > bkw > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/aster> isk-users > To > UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
