RE: [Asterisk-Users] Cisco 7960G "disk full error"

Tue, 12 Oct 2004 14:59:16 -0700

Title: Message

If your 79XX.txt file has SIP software specified you need to have a SIPDefault file.   Also depending on the firmware version you might have to upgrade to sip version 3 then 4 then 5 the 6 then 7.  

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Andrew Edmond
Sent: Tuesday, October 12, 2004 4:59 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error"

 

Henry,

 

Thanks!  This is a step in the right direction...

 

However, since it has P00* firmware on it, it never downloads SIPDefault.cnf.  I guess I'll have to make SEPDefault.cnf as small as possible then...?

 

Andrew

 

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Henry Devito
Sent: Tuesday, October 12, 2004 2:43 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Cisco 7960G "disk full error"

The buffer is full on the 7960 because it keeps the old software along with downloading the new software just incase the new software fails.  What I have been doing is using a very generic SIPDefault.cnf and that allows enough space to download the upgrades.

 

This is the SIPDefault.cnf I use for upgrades.  Once the upgrade is done use your original SIPDefault.

 

image_version: "P0S3-04-4-00"

# Proxy Server

proxy1_address: "192.168.254.4"

proxy6_port:"5060"

 

 

 

 

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Andrew Edmond
Sent: Tuesday, October 12, 2004 4:26 PM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Cisco 7960G "disk full error"

 

Hello,

 

I'm trying to upgrade my 7960G that I bought off ebay to SIP 7.2 firmware.  Apparently this phone had pretty old firmware on it... it's using Application Load ID P003H310 (version 3.0.12 Call Manager).

 

I've setup both a UNIX and Windows (SolarWinds) tftp server, and acquired firmware images for SIP 3.2, 4.4, 5.3, 6.3, and 7.2.

 

I set my OS79XX.txt contents to 8.3 filenames to download P0S3-03-2-00.bin (renamed to 8.3 filename P0S30320.bin).

 

The tftp server successfully logs the connection from the phone, succesfully downloads OS79XX.txt, and then starts to download P0S30320.bin.  After 391168 bytes of download (the file is 409k), the phone dumps the transfer.

 

So I installed ethereal on my windows server.  It shows that at packet 769 the cisco phone reports "Disk Full".

 

I looked into this and came up with these previous posts:

 

 

However, since my phone firmware is so old I assume that I might need SIP 2.3 firmware to get this going. 

 

In actuality, this is taking WAY more time than I had anticipated, so finally I'm reaching out to anyone who has had old firmware like mine (P003H310) and successfully upgraded it.

 

Thank you!

 

Andrew Edmond

_______________________________________________
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

Reply via email to