mine had the same FW on it when i started, i went to 6.3, and then 7.2 with no issues.
On Tue, 12 Oct 2004 16:43:10 -0500, Henry Devito <[EMAIL PROTECTED]> wrote: > > > > The buffer is full on the 7960 because it keeps the old software along with > downloading the new software just incase the new software fails. What I > have been doing is using a very generic SIPDefault.cnf and that allows > enough space to download the upgrades. > > > > This is the SIPDefault.cnf I use for upgrades. Once the upgrade is done use > your original SIPDefault. > > > > image_version: "P0S3-04-4-00" > > # Proxy Server > > proxy1_address: "192.168.254.4" > > proxy6_port:"5060" > > > > > > > > > > ________________________________ > > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Andrew Edmond > Sent: Tuesday, October 12, 2004 4:26 PM > To: [EMAIL PROTECTED] > Subject: [Asterisk-Users] Cisco 7960G "disk full error" > > > > > > > Hello, > > > > > > I'm trying to upgrade my 7960G that I bought off ebay to SIP 7.2 firmware. > Apparently this phone had pretty old firmware on it... it's using > Application Load ID P003H310 (version 3.0.12 Call Manager). > > > > > > I've setup both a UNIX and Windows (SolarWinds) tftp server, and acquired > firmware images for SIP 3.2, 4.4, 5.3, 6.3, and 7.2. > > > > > > I set my OS79XX.txt contents to 8.3 filenames to download P0S3-03-2-00.bin > (renamed to 8.3 filename P0S30320.bin). > > > > > > The tftp server successfully logs the connection from the phone, succesfully > downloads OS79XX.txt, and then starts to download P0S30320.bin. After > 391168 bytes of download (the file is 409k), the phone dumps the transfer. > > > > > > So I installed ethereal on my windows server. It shows that at packet 769 > the cisco phone reports "Disk Full". > > > > > > I looked into this and came up with these previous posts: > > > > > > http://www.loligo.com/asterisk/Cisco/79xx/upgrading.79xx.phones > > > http://lists.digium.com/pipermail/asterisk-users/2003-October/023021.html > > > > > > However, since my phone firmware is so old I assume that I might need SIP > 2.3 firmware to get this going. > > > > > > In actuality, this is taking WAY more time than I had anticipated, so > finally I'm reaching out to anyone who has had old firmware like mine > (P003H310) and successfully upgraded it. > > > > > > Thank you! > > > > > > Andrew Edmond > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
