|
Ok, I've seen discussion before on doing transfers
(attended and unattended), there seems to be much confusion over
it.
As things sit, I've been trying (unsuccessfully) to
do transfers with a zap channel (analog phone attached to TDM400). I have
no idea what I'm missing. My current understanding is that I need to have
transfer=yes in zapata.conf, do a flash hook, dial the 2nd number, flash hook
again and we're linked (attended). Then if I hang up the call will
be transfered.
However, when I try to do this things don't
work. Here's what I do:
- connection is made between Zap/3 (analog phone)
and Zap/1 (outside line).
- flash hook to get dialtone (I do get
dialtone)
- attempt to transfer to extension 7007 - I dial
7007
- after dialing the 2nd zero, and before dialing
the 2nd seven, I hear Asterisk announce (seven - zero - one) and then Zap/3 is
hung up (I get a busy signal). Zap/1 gets parked.
Here's what the log shows:
-- Zap/1-1 answered
Zap/3-1
-- Attempting native bridge of Zap/3-1 and Zap/1-1 -- Started three way call on channel 1 -- Started music on hold, class 'default', on Zap/3-1 -- Attempting native bridge of Zap/3-1 and Zap/1-1 -- Starting simple switch on 'Zap/1-2' -- Started music on hold, class 'default', on Zap/3-1 == Parked Zap/3-1 on 701. Will timeout back to dostuff,7001,1 in 45 seconds -- Added extension '701' priority 1 to parkedcalls -- Playing 'digits/7' (language 'en') -- Hungup 'Zap/1-1' == Spawn extension (dostuff, 7001, 1) exited non-zero on 'Parked/Zap/3-1<ZOMBIE>' -- Stopped music on hold on Parked/Zap/3-1<ZOMBIE> -- Playing 'digits/0' (language 'en') -- Playing 'digits/1' (language 'en') -- Parking call to 'Zap/1-2' -- Hungup 'Zap/1-2' -- Stopped music on hold on Zap/3-1 == Zap/3-1 got tired of being parked -- Hungup 'Zap/3-1' I'm not sure what I'm missing. Apparently
something to do with parked calls, so I must be misunderstanding how do to the
call transfer.
I've also tried enabling Asterisk transfer on the
channel (exten => 7010,1,Dial(${CORDLESS},20,tT)).
My understanding of this method is that this allows
one to hit the pound (#) to start a transfer. Yet pound does
nothing. Is it fair to assume that the tT only works on SIP channels, or
am I missing something else.
Any help is much appreciated....
Paul
|
_______________________________________________ Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
