Update: I updated the firmware today to 3.3.6(GW). This new firmware seems to have done the trick. My call display is now working fine and the disconnect is getting better,( needs a little more tweaking) I set the PSTN Silence Threshold to low. and boost the PSTN To SPA Gain: to 3. Over all things seems to be working as the should now.
On 10/10/06, Pittner, Zoltan <[EMAIL PROTECTED]> wrote:
I think I had that problem myself with the same setup. Also only efvery second/third incoming call got only to the Digital Receptionist - the rest were lost. Increasing the Gain on the 3102 for the PSTN line helped solving that issue. Zoltan. ----- Original Message ----- *From:* Anthony Boyington <[EMAIL PROTECTED]> *To:* [email protected] *Sent:* Tuesday, October 10, 2006 4:24 AM *Subject:* [on-asterisk] Disconnect I have a Linksys SPA3102 connected to my trixbox from my PSTN, all works fine. My problem is that after a call is disconnected my line is held for almost a minute before I can received a new call. I am not sure if this is because the SPA3102 is not detecting the *Disconnect Tone or maybe a problem with my asterisk, *** any ideas on this problem? or does anyone know what the disconnect tone should be for Bell Canada/Ontario/Toronto
