Thanks Dave but he has to keep his 905428 number. his Toronto office (416)is already C/F to an IAX DID (647)and works very well. Henry L.Coleman CEO *VoIP-PBX* 1-866-415-5355 Toronto Ontario Canada
> Henry, > > I don't know if this helps but I'll put it out there. > > You were at Glenn's office behind Toby's restaurant several months > ago. He's running a little Asterisk box with 23 channels and 1-5 > users. It's way overprovisioned but it's the only way to get good > voice quality and callerid manipulation etc. > > If this is for your lawyer friend and Yonge and Sheppard, and you're > trying to pick up the 416 number, we could terminate it on Glenn's box > and take it from there. > > How many minutes are we talking here? $230 pays for a lot of toll free. > > I know Glenn would be open to hearing proposals that would help offset > his $800/mo PRI charge. > > Dave > > On 1/12/07, Henry.L.Coleman <[EMAIL PROTECTED]> wrote: >> Yes I agree, I hate the idea of using Bell but I can't find anyone else >> who has access to the 905428 exchange. >> Here's the problem... >> My client's number is a foreign exchange line, it's local to Toronto but >> calls to Whitby (his location)would be L.D., so he has this line go from >> Ajax to Whitby so his customers can call from Toronto without LD >> charges. >> An FX line is charged per kilometer so he pays about $230 per month. >> He has to keep the number so he has to port this number to a DID if he >> wants to save money. >> >> Henry L.Coleman CEO >> *VoIP-PBX* 1-866-415-5355 >> Toronto Ontario >> Canada >> >> >> > I would agree with Chad here. It's much like the Primus TalkBroadband >> > service. They'll tell you it's not possible, but if you sniff the >> > connection you can find your login information. After that, it's just >> a >> > matter of spoofing the MAC of your ATA on your Asterisk and then >> logging >> > into the appropriate servers. >> > >> > But I also agree with Andrew Kohlsmith - This is a lot of trouble for >> > very little gain. The VoIP pricing for Bell isn't really competitive >> > with other, local, more customer-focused VSP's. >> > >> > Cheers, >> > Alex >> > >> > ___________________________________________ >> > Alex Robar, Technical Support, GearyTech Inc. >> > >> > 3075 Fourteenth Avenue, Unit 3, Markham, Ontario L3R 0G9 >> > Markham: 905-513-8000 x 223 Fax: 905-513-8040 >> > Toronto: 416-226-3614 Toll Free: 888-890-3499 >> > [EMAIL PROTECTED] www.gearytech.com >> > >> > Strategic management of technology for business. >> > >> > -----Original Message----- >> > From: Chad Osmond [mailto:[EMAIL PROTECTED] >> > Sent: Thursday, January 11, 2007 2:06 PM >> > To: [email protected] >> > Subject: RE: [on-asterisk] Bell VoIP services >> > >> > Henry, >> > >> > I was involved in the original launch teleconference and one of the >> > questions asked was if it was possible to use third party / non-bell >> > hardware and their official answer was that it would not work, that >> you >> > had to use their hardware to interconnect. >> > >> > My feelings are that it's just SIP based though, and may work with >> > asterisk with some work. >> > >> > Chad >> > >> > >> > >> > -----Original Message----- >> > From: Apache [mailto:[EMAIL PROTECTED] On Behalf Of >> > Henry.L.Coleman >> > Sent: January 11, 2007 1:32 PM >> > To: [EMAIL PROTECTED]; [email protected] >> > Subject: [on-asterisk] Bell VoIP services >> > >> > Does anyone out there know what protocol Bell Canada is using for >> their >> > new VoIP Business IP Broadband service ? I would like to connect it >> > directly to * if its SIP and the codec is compatable. >> > >> > --------------------------------------------------------------------- >> > To unsubscribe, e-mail: [EMAIL PROTECTED] >> > For additional commands, e-mail: [EMAIL PROTECTED] >> > >> > >> > -- >> > ExchangeDefender Message Security: Click below to verify authenticity >> > http://www.exchangedefender.com/verify.asp?id=l0CJauUa017229&[EMAIL >> > PROTECTED] >> > >> > >> > --------------------------------------------------------------------- >> > To unsubscribe, e-mail: [EMAIL PROTECTED] >> > For additional commands, e-mail: [EMAIL PROTECTED] >> > >> > >> > >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [EMAIL PROTECTED] >> For additional commands, e-mail: [EMAIL PROTECTED] >> >> > >
