On Wed May 16 2007 13:23:53 Andrew Kohlsmith wrote: > On Wednesday 16 May 2007 12:58 pm, Mark Borg wrote: > > Hi all, i have a need to put 2 extensions at a remote site. it does have > > fixed IP but it is NAT, and the host (* 1.4) is NATted also. is there an > > easy way to get both extensions to work in this situation? Would it be > > better/faster to just run a second * & use IAX? > > thanks... > > Get the Asterisk box on a public IP (or screw about with port forwarding) > and give them some Polycoms. > > I have numerous installations with polycom phones behind NAT (Linksys > primarily, but Linux NAT as well), no fancy config on the NATting routers, > no fancy config on the phones, and only a "nat=yes" and "canreinvite=no" on > the sip peer entries. > > Works like a charm. > > -A. > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED]
Thanks for the quick suggestion.... BUT, the SIP phones are on hand already & are aastra 9133i. Not too sure if I would be able to put client PBX on the public IP, that would be a tough sell.
