David: What's you zaptel.conf say? Are both groups set to pri_net or pri_cpe signalling? You'll need that for a crossover cable...
Thanks, Mark. Please note: Effective April 1, my e-mail address is [EMAIL PROTECTED] -----Original Message----- From: David Cook [mailto:[EMAIL PROTECTED] Sent: Tuesday, July 03, 2007 1:57 PM To: [email protected] Subject: [on-asterisk] Calls not connecting on PRI span Here is an interesting support problem. New A102D card. Span 0/1 tied with a cross over cable (to test). Dial an extension out one span exten => _30X,1,Dial(Zap/G0/${EXTEN},45) Should dial out on last channel of group 0 and should arrive on last channel of group 1 (other span) [from-internal] ; inbound from (group 1) Nortel defaults to pass-thru to PSTN ; pstn on trunk group 0, descending order exten => _.,1,MusiconHold() I should hear music. However I get no connection ... Last message is "proceeding" below, no ringing yet the channel (47-1) won't hangup. It's like it doesn't know to connect the two legs of the call!! -- Executing [EMAIL PROTECTED]:1] Dial("SIP/7046-1bebd770", "Zap/G0/300|45") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called G0/300 -- Accepting call from '7046' to '300' on channel 0/23, span 2 -- Executing [EMAIL PROTECTED]:1] MusicOnHold("Zap/47-1", "") in new stack -- Started music on hold, class 'default', on Zap/47-1 -- Zap/23-1 is proceeding passing it to SIP/7046-1bebd770 topbx*CLI> Asterisk 1.4.5 Zaptel 1.4.3 Sangoma Wanpipe 2.3.4-10 Any ideas?? dbc. -- David Cook --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
