On 7/4/07, McQuiggan, Mark - Broadridge (Toronto) < [EMAIL PROTECTED]> wrote:
Dave: Try a straight-through cable. You need a straight-thru to connect a pri_cpe to a pri_net.
Maybe I misunderstand, but what you're saying doesn't seem right. I've never connected Asterisk to Asterisk but I've connected Asterisk line side to a bunch of different things (Avaya and Nortel PBXs). I've alway used a T1 crossover cable and then had one side act as NET and the other as CPE. My understanding was that the crossover cable addressed the electrical requirements and the CPE/NET settings addressed signalling requirements. Am I wrong? I would expect that if Dave had the wrong cable, he wouldn't get anything at all in terms of call setup. In fact, I would think the B and D channels wouldn't initialise. Dave Donovan
