Thanks a lot Mike, I will change my settings tonight and see if it works for me. Did you need to create a trunk for your DIDs? Did not sound like you did, but just wanna double check.
Cheers, Richard ----- Original Message ----- From: Mike Ashton To: [email protected] >> "Asterisk Group (E-mail)" Sent: Wednesday, October 03, 2007 3:36 PM Subject: Re: [on-asterisk] Display CID from DIDX numbers Richard, I have about an 100 numbers from Didx and CallerID works just fine but I use SIP from them and only set it up as an extension when it is to ring direct to a set and not to any sort of IVR or other routing. At didx I just do the number, so [EMAIL PROTECTED] then in Inbound routes add the DID with no CallerID then set the destination, either IVR or a ring group That's it and work just fine. Mike Richard (Rogers @ work) wrote: Hi, I bought DIDs from www.didx.net but was unable to see the originating CID shown in asterisk call record. It just showed extension 200 in the record. The following is the IAX string I configured on the didx side for the DID. 100:[EMAIL PROTECTED]/200 I wonder if this is the correct way to configure it? It seems that this is different from using a trunk... Does anyone use didx? Thanks in advance, Richard --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -- Mike Ashton Quality Track Intl Ph: 647-722-2092 x 301 Cell: 416-527-4995 Fax: 416-352-6043 QTI CONFIDENTIAL AND PROPRIETARY INFORMATION The contents of this material are confidential and proprietary to Quality Track International, Inc. and may not be reproduced, disclosed, distributed or used without the express permission of an authorized representative of QTI. Use for any purpose or in any manner other than that expressly authorized is prohibited. If you have received this communication in error, please immediately delete it and all copies, and promptly notify the sender. ------------------------------------------------------------------------------ --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
