Hi David, I have been wanting something like this for a long time because it goes to a more general feature available in nearly all PBX's ....... Class of Service at the moment the only suggestion I could make is if the phone has a dial plan, adding a pre-dial digit then disgarding it in the dial plan ie. Dial 9416NXXXXXX -> Phone ->39416NXXXXXX -> dialplan 39|416NXXXXXX Hope this helps
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Henry L. Coleman CEO [EMAIL PROTECTED] http://voip-pbx.ca ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ < David Cook> > I have a need to use a special route for one source-line only and I can't > figure out how to make trixbox do it from within the GUI. (I'd prefer to > stay within the GUI in this particular case). > > Here is the scenario: > > Phone 202 has registrations for SIP/202 on L1/L2, and SIP/302 on L3. > > I want a different route if the user picks L3 (source SIP/302) than if they > pick L1/L2 to dial. I want the dial pattern to be the same, eg: dial > 9+[1]+10. I do not want a separate predecessor digit to identify which route > to use. > > Any ideas? Am I missing something very obvious. > > - dbc. > > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
