I think that very few people would recommend using that card in a production environment. Any of the analogue cards from Sangoma, Digium, Rhino, Pika and others would serve you much better.
As for the static, it could be a lot of things, but the first thing I would look at is your rxgain and txgain settings. Intermittant static can come from having them set too high. Also, do you know if your lines are clean? Does the static happen when it rains? When the static happens, does it happen on all calls for a period of time, and then clear up for a while? That can be caused by moisture in the Bell circuits. If that's the case, you should be able to hear it on a regular telephone. Jim -- Jim Van Meggelen [EMAIL PROTECTED] http://www.oreillynet.com/pub/au/2177 "A child is the ultimate startup, and I have three. This makes me rich." Guy Kawasaki -- Syd Carter wrote: > Before I go crazy checking every wire and connection from > pstn jack to x100p - has anyone else experienced occasional > poor quality connections? I'll hear all types of fuzz and > echo. I've replaced the x100p card already. I'm using OSLEC > as the echo cancellor. If this is an issue with the x100p > driver then what other fxo would you suggest? > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] For > additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
