They don't have problem with ATA. The only issue was in the asterisk. I don't have their account but I am thinking about to get one. But wanna make sure it works before I call them.
Alex On Thu, 2 Apr 2009 13:48:19 -0400 "Liviu Toma" <[email protected]> wrote: > I never set it up on Asterisk, but I helped somebody configure a PAP2 just a > couple days ago. > Obviously, one must purchase the SIP credentials (they call it > "configuration file", but it's just a Word doc) in order to use an ATA. > I noticed issues with the using it behind a NAT gateway. I usually use a > STUN server and NAT Mapping Enable on the Linksys devices, but with > freephoneline that did not work. Without those, I'm wondering how stable > would the connection be. > I did not have to change the SIP port, I used 5060. > For the Voice Mail, dial *98 > > Liviu > > > ----- Original Message ----- > From: "Alex Wang" <[email protected]> > To: "Terry D. Cudney" <[email protected]> > Cc: "Asterisk User Group" <[email protected]>; <[email protected]> > Sent: Thursday, April 02, 2009 1:38 PM > Subject: Re: [on-asterisk] Help with freephoneline.ca... > > > I googled and DSLReport shows some help.. > > *********************http://www.dslreports.com/forum/r20583955-Any-news-about-Freephonelineca-~start=20*********************** > > I've also bought the configuration file. Took 7 days to get it. File is in > MS office 'docx' format, what is kind of pain to open. > > Voice quality is ok most of time. However, tonight incoming audio on > outgoing calls has been absolutely terrible. Strangely, audio on incoming > calls is just fine. > > Sometimes you get a message "this call is not covered by your tariff plan" > even if you dial a number that is allowed. > > Supports G711 (and G729 but only on outgoing calls). Incoming won't work if > you set it to G729 only. > > Caller id with name works on incoming. Outgoing caller ID is sent as a > number only. > > SIP port must be set to 80. It won't register if set to 5060. > > 911 does NOT work at all despite them claiming they need your right info for > 911 to work. > > Does anyone know hot to check VM from ATA? I've tried 123, 456, 789, 000, > 86.... > > > > On Thu, 2 Apr 2009 13:29:18 -0400 > "Terry D. Cudney" <[email protected]> wrote: > > > Hi Andrew, Alex and all, > > > > A few months ago, I paid the $50 to get FreePhoneLine working with > > asterisk (v1.4.11 at the time). I never did get it working. > > > > Their tech people told me that I could use asterisk with it it I wanted > > to, but that (at that time, anyway) no one had been able to do so. They > > said they would help as much as they could, but that if I couldn't get it > > working, the $50 was non-refundable. Well, I spend more hours than I want > > to admit, trying to get asterisk to register with FreePhoneLine, to no > > avail. I spent several hours on the phone with different of their tech > > support staff, who were pleasant, but unable to resolve the problems. > > > > I got pretty annoyed with it and had VISA cancel the charge. I never > > heard anything more from FreePhoneLine. > > > > My bottom line: Don't waste your time and money, unless they have > > changed their story and assure you that it can be made to work with > > asterisk... and then... caveat emptor. > > > > --terry > > > > On Thu, Apr 02, 2009 at 11:36:16AM -0400, Alex Wang wrote: > > --> Noway unless you pay 50. > > --> > > --> > > --> > > --> On Thu, 2 Apr 2009 11:29:43 -0400 > > --> "STOCK Andrew -TSDC" <[email protected]> wrote: > > --> > > --> > Good Day all... > > --> > > > --> > > > --> > > > --> > Has anyone had experience with freephoneline.ca? I have signed up > > for > > --> > their free DID number here in Toronto, now I am trying to configure > > it > > --> > as a trunk in my Trixbox. My only issue is, is there is no where on > > --> > their website does it tell you how to configure their service. It > > seems > > --> > to be automatically configured using their SIP client. And the > > client > > --> > seems to be locked down and you can not get to the configuration > > --> > parameters. > > --> > > > --> > > > --> > > > --> > Has anyone been able to get it to work with their Trixbox? I would > > love > > --> > to be able to set it up. > > --> > > > --> > > > --> > > > --> > Thanks. > > --> > > > --> > > > --> > > > --> > Andrew R. Stock / Capgemini / Toronto > > --> > > > --> > Senior Telecom Analyst / New Horizon System Solutions > > --> > Office: +1 416 592-2198 / Mobile: +1 416 346-2198 / > > --> > www.ca.capgemini.com <http://www.ca.capgemini.com/> > > --> > Fax: +1 416 592-4888 > > --> > > > --> > 700 University Avenue, H2C27, > > --> > > > --> > Toronto, Ontario > > --> > > > --> > CANADA > > --> > > > --> > M5G 1X6 > > --> > Email: [email protected] > > --> > > > --> > Join the Collaborative Business Experience > > --> > > > --> > THE RIGHT SHORE IS RIGHT HERE ! > > --> > > > --> > > > --> > > > --> > > --> > > --> > > --> > > --> --------------------------------------------------------------------- > > --> To unsubscribe, e-mail: [email protected] > > --> For additional commands, e-mail: [email protected] > > --> > > > > -- > > Name: Terry D. Cudney > > Phone: (705) 812-4949 > > SIP: [email protected] > > E-mail: [email protected] > > > > Please avoid sending me Word or PowerPoint attachments. > > See http://www.gnu.org/philosophy/no-word-attachments.html > > > > Having a smoking section in a restaurant is like... > > having a peeing sectionin a swimming pool. > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [email protected] > > For additional commands, e-mail: [email protected] > > > > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
