Yeh, this would be my best solution. SNR cost around $18 per month. Henry L.Coleman [VoIP-PBX.ca] -------------------------------------------------
> Jim Van Meggelen< > What you might look into is this: > > Convert their main number to a Bell Single Number Reach > Keep their second line (doesn't matter what the number is since it won't > be published). Have it converted to a 1FL with no call waiting, > voicemail or call forward0 > Increase the number of PSTNs on the Single Number Reach service to 5 calls > Set up the Single Number Reach to try the analog line that used to be > the second line > Set up the Single Number Reach to ring the VoIP circuits if the 2nd line > is busy. > > Jim > > > Doug Geary wrote: >> We have an Asterisk customer on Bell who wants to drop all copper lines >> except for their primary line, and have that line transfer to VoIP when >> busy. To the best of my memory, Bell will not do call forward busy, and >> we have to move their line somewhere else. Last time we did this, we >> sent it to Primus and it was a real hassle... 4 weeks and a lot of >> administration overhead to make it work. Is there an easier way, or a >> better process? >> >> Thanks, >> Doug >> >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: [email protected] >> For additional commands, e-mail: [email protected] >> >> >> > > > -- > > -- > Jim Van Meggelen > [email protected] > http://www.oreillynet.com/pub/au/2177 > > "A child is the ultimate startup, and I have three. > This makes me rich." > Guy Kawasaki > -- > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > > --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
