Thanks to all for the fantastic responses. Last time I tried this with Bell, I got stonewalled. Now, I am informed, armed and dangerous.
Thanks, Doug -----Original Message----- From: Jim Van Meggelen [mailto:[email protected]] Sent: April-20-09 6:19 PM To: Doug Geary Cc: [email protected] Subject: Re: [on-asterisk] Call Forward Busy What you might look into is this: Convert their main number to a Bell Single Number Reach Keep their second line (doesn't matter what the number is since it won't be published). Have it converted to a 1FL with no call waiting, voicemail or call forward0 Increase the number of PSTNs on the Single Number Reach service to 5 calls Set up the Single Number Reach to try the analog line that used to be the second line Set up the Single Number Reach to ring the VoIP circuits if the 2nd line is busy. Jim Doug Geary wrote: > We have an Asterisk customer on Bell who wants to drop all copper lines > except for their primary line, and have that line transfer to VoIP when > busy. To the best of my memory, Bell will not do call forward busy, and > we have to move their line somewhere else. Last time we did this, we > sent it to Primus and it was a real hassle... 4 weeks and a lot of > administration overhead to make it work. Is there an easier way, or a > better process? > > Thanks, > Doug > > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [email protected] > For additional commands, e-mail: [email protected] > > > -- -- Jim Van Meggelen [email protected] http://www.oreillynet.com/pub/au/2177 "A child is the ultimate startup, and I have three. This makes me rich." Guy Kawasaki -- --------------------------------------------------------------------- To unsubscribe, e-mail: [email protected] For additional commands, e-mail: [email protected]
