|
Graham,
I think this is the process you should follow to
get it work:
First, you need to load the x100p card, and to
do so, you can try:
modprobe zaptel --this will turn the zaptel module on. Then, you need to turn on the module wcfxo, but it
needs the zaptel.conf file. The problem is that that file maybe is not in your
system, astlinux comes with a symlink to the /tmp/.../zaptel.conf
So, you will need to edit the file, with this: vi
/etc/zaptel.conf and configure one fxo like this: fxs_ks=1 . Note: this file
will be erase when you reboot the system.
Then, you should be able to load the wcfxo module
with this:
modprobe wcfxo
You can use tools like this: ztcfg -vvv and
zttool
Then, just make the configuration of the
zapata.conf with one fxo, and you will be ready to run asterisk
-gcvvvv
Also there's an option inside the rc.conf, that
will ask you wich modules you want to load with the zaptel, you can try enabling
wcfxo, and then you will be able to run service zaptel start, wich is
easier.
Arturo,
|
_______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
