Barry Fawthrop wrote:
> Kristian
> Ok so the CF is Read/Write then
> And the Configurations could be in /OPT, if a second partition was
> created as opposed to using a separate USB Device (for the
> configurations as per the user guide.)
>
> Also Which is better using a Clipcomm CG410 (4 FXO Port Gateway) or
> using a Net2801 with a TDM400p with 4 FXO Modules ?
>
> Thanks
> Barry
>
Barry,
The keydisk partition is read/write regardless of which physical device
it is on. The keydisk stores all of your configurations. If you wanted
to add files that would stay in memory, but wouldn't be changed
frequently, opt would be the place to do it. The keydisk will have more
writes than any other mounted partition.
You will have better luck with external gateways. I prefer them over
PCI interface cards in almost all situations.
--
Kristian Kielhofner
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL
PROTECTED]
