Thanks, Tom
On 9/28/06, Michael Mee <[EMAIL PROTECTED]> wrote:
Kristian Kielhofner wrote:
> Barry Fawthrop wrote:
>>Also Which is better using a Clipcomm CG410 (4 FXO Port Gateway) or
>>using a Net2801 with a TDM400p with 4 FXO Modules ?
>
> You will have better luck with external gateways. I prefer them over
> PCI interface cards in almost all situations.
In the fwiw department, I have two Mediatrix 1104 gateways that I found
on ebay for <$100 (about $450 new) which I hope to use. Advantages I
perceive over a TDM400 are: power-off failover to PSTN, better voice
quality, ability to use Soekris 4801 instead of mini ITX or similar
(lower power, serial port admin).
I haven't configured them yet, so this idea is currently worth what
you're paying for it ;-). It does seem that latest firmware (which is
now publicly available despite what old google-retrieved messages will
suggest) is more Asterisk friendly.
cheers, michael
_______________________________________________
Astlinux-users mailing list
[email protected]
http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED].
_______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users
Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
