I think Peter is right. One may configure a soekris board either as a dedicated router or as an asterisk server but not both on the same machine. I asked about it the producer and they simply offered me to buy the expansion Lan card to get it with ports to the same lan. However, in case you need it as a lan too, it is cheaper to buy an external router or switch and connect it either to eth1 or eth2.
For SIP connection only (And connection to the asterisk server) you don't have to be on the same network. As long as you can register with the asterisk server's address you may use both eth ports for SIP extensions. Michael --- Peter Bowyer <[EMAIL PROTECTED]> wrote: > On 03/12/06, Mark van Berkel <[EMAIL PROTECTED]> > wrote: > > > > INTIF=ap0 > > INTIP=192.168.2.1 > > INTNM=255.255.255.0 > > > > INT2IF=eth1 > > INT2IP=192.168.2.2 > > INT2NM=255.255.255.0 > > Can't solve your specific problem, but slightly more > generally - you > have defined 2 different interfaces on the same > network > (192.168.2.0/24) - this will lead to brokenness. I > suggest you > separate these out as a first step - eg move the > eth1 network to > 192.168.3.0 or something with a similar effect. > > Peter > > > > -- > Peter Bowyer > Email: [EMAIL PROTECTED] > _______________________________________________ > Astlinux-users mailing list > [email protected] > http://lists.kriscompanies.com/mailman/listinfo/astlinux-users > > Donations to support AstLinux are graciously > accepted via PayPal to [EMAIL PROTECTED] > ____________________________________________________________________________________ Need a quick answer? Get one in minutes from people who know. Ask your question on www.Answers.yahoo.com _______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
