Hi all, I need some guidance and help on configuring my Astlinux box to act as a router/firewall as well as a great PBX! I am not a networking expert so likely some of my problems are likely not having a complete understanding of IP networks.
Here is my setup: I have 2 wired ethernet interfaces (one is a ASIX USB dongle), and an Atheros wi-fi card setup as a AP. All hardware is up and working. Calls to my IAX provider over the internet work fine. (snipped from my rc.conf) EXTIF=eth0 (this is connected to an upstream DHCP router providing Internet access. The IP address assigned is in the range of 192.168.1.1xx) INTIF=ap0 INTIP=192.168.2.1 INTNM=255.255.255.0 INT2IF=eth1 INT2IP=192.168.2.2 INT2NM=255.255.255.0 DMZ=extme DENYACT="DROP" I want to provide DHCP services on to the clients on INTIF and INT2IF (ap0 & eth1), access to the Asterisk server and Internet connectivity. The DHCP server is working and assigning IP addresses. I have tried bridging the various interfaces (eth1 and ap0, eth0 and ap0, etc) buy no joy. If anyone could point me to some documentation/wiki/FAQ on this it would be appreciated. Mark
_______________________________________________ Astlinux-users mailing list [email protected] http://lists.kriscompanies.com/mailman/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
