I had a similar problem: seems it was bad IDE emulation. Try changing your .conf and syslinux.cfg files to use hdb instead of hda.
[EMAIL PROTECTED] wrote: > I followed your instruction but after the runnix is loaded the bootprozess > stops: > > SYSLINUX 3.11 2005-09-02 EBIOS Copyright (C) 1994-2005 H. Peter Anvin > boot: ww.runnix > Loading runnix............................... > Loading runnix.img................. > Ready. > > I've tried the same configuration on a vmware image and it goes through this > point and starts the .run. > I'm using a 1GB Transcent CF-Card. With Grub it must be mounted as hdb. Could > this be the problem and how can I fix it? > > Klaus > > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Im Auftrag von Darrick > Hartman (lists) > Gesendet: Donnerstag, 20. Dezember 2007 21:37 > An: AstLinux Users Mailing List > Betreff: [Astlinux-users] Beta Images > > I just uploaded some images I built today from the asterisk-beta branch. > This is the branch that contains the latest Asterisk 1.4 code. > > There are some issues that we're still working out. > > For example, right now res_snmp does not work properly. You need to > edit /etc/asterisk/modules.conf to noload res_snmp.so or Asterisk will > not start. > > These image files are runnix images. To load them, follow the > instructions here: > > http://www.astlinux.org/node/28 > > The images can be found here: > > http://www.djhsolutions.com/astlinux/ > > These images are intended for testing purposes. Use with care. > > Darrick > ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
