Hi, Ioan,

 

Thanks that did help, at least it gave me a direction to head towards.

 

The command lsmod, gave 

 

wctdm                  31552  0

 

but dmesg | grep wctdm

 

returned nothing.  

 

Sorry, I am an utter beginner with this.  I have simply loaded a Via
image onto a CF and trying to get Astlinux to work from there.

 

Any suggestions?

 

Rgds,

Clara

 

________________________________

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ioan
Indreias
Sent: Monday, 25 August 2008 9:53 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p

 

Hi Clara,

 

What is the oputput for lsmod? I assume somthing like:

 

pbx ~ # lsmod
Module                  Size  Used by
...

ztdummy                 3848  0
zaptel                188604  3 ztdummy
...

 

You have to see that wctdm (the driver for your TDM card) is loaded. If
not, you should try to use modprobe wctdm and after this you have to
check again with lsmod.

 

pbx ~ # modprobe wctdm
pbx ~ # lsmod
Module                  Size  Used by
wctdm                  31552  0
...
ztdummy                 3848  0
zaptel                188604  4 wctdm,ztdummy
...

 

Using dmesg you will check if the driver was loaded OK and what module
have been detected. Sorry - but I do not have a card now in my system so
there is no examples...

 

I hope it helps,

Ioan.

        ----- Original Message ----- 

        From: Clara Chan <mailto:[EMAIL PROTECTED]>  

        To: astlinux-users@lists.sourceforge.net 

        Sent: Monday, August 25, 2008 8:37 AM

        Subject: [Astlinux-users] digium tdm410p

         

        Hi, all, 

         

        I have finally got 0.4.8 working with a Via board and thought I
will take the next step in installing a Digium tdm410p with two fxs
ports in modules 1 & 2, so I could attach analog phones and a fax
machine to it.

         

        But I am getting this error "03:0f.0 Ethernet controller:
Digium, Inc.: Unknown device 8005 (rev 11)" when I type in a "lspci"
command.  In the hopes that it's the OS being confused, I tried the
"ztcfg -vv" command, and received "ZT_CHANCONFIG failed on channel 1: No
such device or address (6)" as an error.

         

        I am now stuck.  Should there be a module that is required to be
dded in rc.modules?? My current one looks like this:

         

        # These modules get modprobe'd when the system starts up.

        #rtc

        #Comment out the modules you don't need, and change the order to

        #move eth0 to eth1, etc.

        #Ethernet support

        #10/100 first, then Gigabit

        #3c59x

        #typhoon

        #tulip

        #eepro100

        #via-velocity

        #natsemi

        #forcedeth

        #8139cp

        #8139too

        via-rhine

        via-rhine

        #pcnet32

        #acenic

        #e1000

        #ns83820

        #r8169

        #tg3

        Padlock

         

        Thanks,

         

        Clara

-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Astlinux-users mailing list
Astlinux-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/astlinux-users

Donations to support AstLinux are graciously accepted via PayPal to [EMAIL 
PROTECTED]

Reply via email to