Probably means we'll have to get a newer kernel in place before it will be usable. I don't have one of those cards. After we get 0.6.0 finally released, we'll take a closer look.
Darrick Justin Coffi wrote: > That would be the same for me as well. > > Clara Chan wrote: >> Sorry, Darrick, >> >> an lspci command, leaves the error of >> >> 03:0f.0 Ethernet controller: Digium, Inc.: Unknown device 8005(rev 11) >> >> Now, I am lost as to how to proceed. >> >> Clara >> >> On Mon, 2008-09-01 at 19:31 -0500, Darrick Hartman wrote: >> >>> Can you do an lspci and an lsmod on the system with Astlinux running and >>> post that information back here? >>> >>> I don't have a tdm410p card so I'm not sure if it's a kernel issue or a >>> zaptel issue. (or something else). >>> >>> The version of zaptel that's included should support that card. >>> >>> Darrick >>> >>> >>> Justin Coffi wrote: >>> >>>> I'm having the same problem as Clara. I'm using >>>> astlinux-trunk-1907-via.tar.gz. >>>> >>>> Has anyone come up with a solution? >>>> >>>> On Mon, Aug 25, 2008 at 5:48 PM, Clara Chan <[EMAIL PROTECTED]> wrote: >>>> >>>>> Thanks, will try that and let you know how I go. >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: [EMAIL PROTECTED] >>>>> [mailto:[EMAIL PROTECTED] On Behalf Of >>>>> Darrick Hartman >>>>> Sent: Tuesday, 26 August 2008 7:41 AM >>>>> To: AstLinux Users Mailing List >>>>> Subject: Re: [Astlinux-users] digium tdm410p >>>>> >>>>> Clara, >>>>> >>>>> You're using a new card from Digium. That won't be supported by the 0.4 >>>>> >>>>> branch. Take a look at the new images I uploaded last week from trunk. >>>>> These will shortly become 0.6 (now that Kris is back in Florida). >>>>> >>>>> You can find these at http://www.djhsolutions.com/astlinux >>>>> >>>>> Instructions for installing these can be found on the documentation >>>>> section of http://www.astlinux.org >>>>> >>>>> Darrick >>>>> >>>>> Clara Chan wrote: >>>>> >>>>>> Hi, Ioan, >>>>>> >>>>>> >>>>>> >>>>>> Thanks that did help, at least it gave me a direction to head towards. >>>>>> >>>>>> >>>>>> >>>>>> The command lsmod, gave >>>>>> >>>>>> >>>>>> >>>>>> wctdm 31552 0 >>>>>> >>>>>> >>>>>> >>>>>> but dmesg | grep wctdm >>>>>> >>>>>> >>>>>> >>>>>> returned nothing. >>>>>> >>>>>> >>>>>> >>>>>> Sorry, I am an utter beginner with this. I have simply loaded a Via >>>>>> image onto a CF and trying to get Astlinux to work from there. >>>>>> >>>>>> >>>>>> >>>>>> Any suggestions? >>>>>> >>>>>> >>>>>> >>>>>> Rgds, >>>>>> >>>>>> Clara >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> ------------------------------------------------------------------------ >>>>> >>>>>> *From:* [EMAIL PROTECTED] >>>>>> [mailto:[EMAIL PROTECTED] *On Behalf Of >>>>>> *Ioan Indreias >>>>>> *Sent:* Monday, 25 August 2008 9:53 PM >>>>>> *To:* AstLinux Users Mailing List >>>>>> *Subject:* Re: [Astlinux-users] digium tdm410p >>>>>> >>>>>> >>>>>> >>>>>> Hi Clara, >>>>>> >>>>>> >>>>>> >>>>>> What is the oputput for lsmod? I assume somthing like: >>>>>> >>>>>> >>>>>> >>>>>> pbx ~ # lsmod >>>>>> Module Size Used by >>>>>> ... >>>>>> >>>>>> ztdummy 3848 0 >>>>>> zaptel 188604 3 ztdummy >>>>>> ... >>>>>> >>>>>> >>>>>> >>>>>> You have to see that wctdm (the driver for your TDM card) is loaded. >>>>>> >>>>> If >>>>> >>>>>> not, you should try to use modprobe wctdm and after this you have to >>>>>> check again with lsmod. >>>>>> >>>>>> >>>>>> >>>>>> pbx ~ # modprobe wctdm >>>>>> pbx ~ # lsmod >>>>>> Module Size Used by >>>>>> wctdm 31552 0 >>>>>> ... >>>>>> ztdummy 3848 0 >>>>>> zaptel 188604 4 wctdm,ztdummy >>>>>> ... >>>>>> >>>>>> >>>>>> >>>>>> Using dmesg you will check if the driver was loaded OK and what module >>>>>> have been detected. Sorry - but I do not have a card now in my system >>>>>> >>>>> so >>>>> >>>>>> there is no examples... >>>>>> >>>>>> >>>>>> >>>>>> I hope it helps, >>>>>> >>>>>> Ioan. >>>>>> >>>>>> ----- Original Message ----- >>>>>> >>>>>> *From:* Clara Chan <mailto:[EMAIL PROTECTED]> >>>>>> >>>>>> *To:* astlinux-users@lists.sourceforge.net >>>>>> <mailto:astlinux-users@lists.sourceforge.net> >>>>>> >>>>>> *Sent:* Monday, August 25, 2008 8:37 AM >>>>>> >>>>>> *Subject:* [Astlinux-users] digium tdm410p >>>>>> >>>>>> >>>>>> >>>>>> Hi, all, >>>>>> >>>>>> >>>>>> >>>>>> I have finally got 0.4.8 working with a Via board and thought I >>>>>> >>>>> will >>>>> >>>>>> take the next step in installing a Digium tdm410p with two fxs >>>>>> >>>>> ports >>>>> >>>>>> in modules 1 & 2, so I could attach analog phones and a fax >>>>>> >>>>> machine >>>>> >>>>>> to it. >>>>>> >>>>>> >>>>>> >>>>>> But I am getting this error "03:0f.0 Ethernet controller: Digium, >>>>>> Inc.: Unknown device 8005 (rev 11)" when I type in a "lspci" >>>>>> command. In the hopes that it's the OS being confused, I tried >>>>>> >>>>> the >>>>> >>>>>> "ztcfg -vv" command, and received "ZT_CHANCONFIG failed on channel >>>>>> 1: No such device or address (6)" as an error. >>>>>> >>>>>> >>>>>> >>>>>> I am now stuck. Should there be a module that is required to be >>>>>> dded in rc.modules?? My current one looks like this: >>>>>> >>>>>> >>>>>> >>>>>> # These modules get modprobe'd when the system starts up. >>>>>> >>>>>> #rtc >>>>>> >>>>>> #Comment out the modules you don't need, and change the order to >>>>>> >>>>>> #move eth0 to eth1, etc. >>>>>> >>>>>> #Ethernet support >>>>>> >>>>>> #10/100 first, then Gigabit >>>>>> >>>>>> #3c59x >>>>>> >>>>>> #typhoon >>>>>> >>>>>> #tulip >>>>>> >>>>>> #eepro100 >>>>>> >>>>>> #via-velocity >>>>>> >>>>>> #natsemi >>>>>> >>>>>> #forcedeth >>>>>> >>>>>> #8139cp >>>>>> >>>>>> #8139too >>>>>> >>>>>> via-rhine >>>>>> >>>>>> via-rhine >>>>>> >>>>>> #pcnet32 >>>>>> >>>>>> #acenic >>>>>> >>>>>> #e1000 >>>>>> >>>>>> #ns83820 >>>>>> >>>>>> #r8169 >>>>>> >>>>>> #tg3 >>>>>> >>>>>> Padlock >>>>>> >>>>>> >>>>>> >>>>>> Thanks, >>>>>> ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
