Sorry, Darrick, an lspci command, leaves the error of
03:0f.0 Ethernet controller: Digium, Inc.: Unknown device 8005(rev 11) Now, I am lost as to how to proceed. Clara On Mon, 2008-09-01 at 19:31 -0500, Darrick Hartman wrote: > Can you do an lspci and an lsmod on the system with Astlinux running and > post that information back here? > > I don't have a tdm410p card so I'm not sure if it's a kernel issue or a > zaptel issue. (or something else). > > The version of zaptel that's included should support that card. > > Darrick > > > Justin Coffi wrote: > > I'm having the same problem as Clara. I'm using > > astlinux-trunk-1907-via.tar.gz. > > > > Has anyone come up with a solution? > > > > On Mon, Aug 25, 2008 at 5:48 PM, Clara Chan <[EMAIL PROTECTED]> wrote: > >> Thanks, will try that and let you know how I go. > >> > >> > >> -----Original Message----- > >> From: [EMAIL PROTECTED] > >> [mailto:[EMAIL PROTECTED] On Behalf Of > >> Darrick Hartman > >> Sent: Tuesday, 26 August 2008 7:41 AM > >> To: AstLinux Users Mailing List > >> Subject: Re: [Astlinux-users] digium tdm410p > >> > >> Clara, > >> > >> You're using a new card from Digium. That won't be supported by the 0.4 > >> > >> branch. Take a look at the new images I uploaded last week from trunk. > >> These will shortly become 0.6 (now that Kris is back in Florida). > >> > >> You can find these at http://www.djhsolutions.com/astlinux > >> > >> Instructions for installing these can be found on the documentation > >> section of http://www.astlinux.org > >> > >> Darrick > >> > >> Clara Chan wrote: > >>> Hi, Ioan, > >>> > >>> > >>> > >>> Thanks that did help, at least it gave me a direction to head towards. > >>> > >>> > >>> > >>> The command lsmod, gave > >>> > >>> > >>> > >>> wctdm 31552 0 > >>> > >>> > >>> > >>> but dmesg | grep wctdm > >>> > >>> > >>> > >>> returned nothing. > >>> > >>> > >>> > >>> Sorry, I am an utter beginner with this. I have simply loaded a Via > >>> image onto a CF and trying to get Astlinux to work from there. > >>> > >>> > >>> > >>> Any suggestions? > >>> > >>> > >>> > >>> Rgds, > >>> > >>> Clara > >>> > >>> > >>> > >>> > >> ------------------------------------------------------------------------ > >>> *From:* [EMAIL PROTECTED] > >>> [mailto:[EMAIL PROTECTED] *On Behalf Of > >>> *Ioan Indreias > >>> *Sent:* Monday, 25 August 2008 9:53 PM > >>> *To:* AstLinux Users Mailing List > >>> *Subject:* Re: [Astlinux-users] digium tdm410p > >>> > >>> > >>> > >>> Hi Clara, > >>> > >>> > >>> > >>> What is the oputput for lsmod? I assume somthing like: > >>> > >>> > >>> > >>> pbx ~ # lsmod > >>> Module Size Used by > >>> ... > >>> > >>> ztdummy 3848 0 > >>> zaptel 188604 3 ztdummy > >>> ... > >>> > >>> > >>> > >>> You have to see that wctdm (the driver for your TDM card) is loaded. > >> If > >>> not, you should try to use modprobe wctdm and after this you have to > >>> check again with lsmod. > >>> > >>> > >>> > >>> pbx ~ # modprobe wctdm > >>> pbx ~ # lsmod > >>> Module Size Used by > >>> wctdm 31552 0 > >>> ... > >>> ztdummy 3848 0 > >>> zaptel 188604 4 wctdm,ztdummy > >>> ... > >>> > >>> > >>> > >>> Using dmesg you will check if the driver was loaded OK and what module > >>> have been detected. Sorry - but I do not have a card now in my system > >> so > >>> there is no examples... > >>> > >>> > >>> > >>> I hope it helps, > >>> > >>> Ioan. > >>> > >>> ----- Original Message ----- > >>> > >>> *From:* Clara Chan <mailto:[EMAIL PROTECTED]> > >>> > >>> *To:* [email protected] > >>> <mailto:[email protected]> > >>> > >>> *Sent:* Monday, August 25, 2008 8:37 AM > >>> > >>> *Subject:* [Astlinux-users] digium tdm410p > >>> > >>> > >>> > >>> Hi, all, > >>> > >>> > >>> > >>> I have finally got 0.4.8 working with a Via board and thought I > >> will > >>> take the next step in installing a Digium tdm410p with two fxs > >> ports > >>> in modules 1 & 2, so I could attach analog phones and a fax > >> machine > >>> to it. > >>> > >>> > >>> > >>> But I am getting this error "03:0f.0 Ethernet controller: Digium, > >>> Inc.: Unknown device 8005 (rev 11)" when I type in a "lspci" > >>> command. In the hopes that it's the OS being confused, I tried > >> the > >>> "ztcfg -vv" command, and received "ZT_CHANCONFIG failed on channel > >>> 1: No such device or address (6)" as an error. > >>> > >>> > >>> > >>> I am now stuck. Should there be a module that is required to be > >>> dded in rc.modules?? My current one looks like this: > >>> > >>> > >>> > >>> # These modules get modprobe'd when the system starts up. > >>> > >>> #rtc > >>> > >>> #Comment out the modules you don't need, and change the order to > >>> > >>> #move eth0 to eth1, etc. > >>> > >>> #Ethernet support > >>> > >>> #10/100 first, then Gigabit > >>> > >>> #3c59x > >>> > >>> #typhoon > >>> > >>> #tulip > >>> > >>> #eepro100 > >>> > >>> #via-velocity > >>> > >>> #natsemi > >>> > >>> #forcedeth > >>> > >>> #8139cp > >>> > >>> #8139too > >>> > >>> via-rhine > >>> > >>> via-rhine > >>> > >>> #pcnet32 > >>> > >>> #acenic > >>> > >>> #e1000 > >>> > >>> #ns83820 > >>> > >>> #r8169 > >>> > >>> #tg3 > >>> > >>> Padlock > >>> > >>> > >>> > >>> Thanks, > >>> > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Astlinux-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/astlinux-users > > Donations to support AstLinux are graciously accepted via PayPal to [EMAIL > PROTECTED] > > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
