Tom Chadwin wrote: > Hi Darrick > > Thanks for the reply. > >> Follow the links. [snip] The link /tmp/etc/zaptel.conf is created when >> /etc/init.d/zaptel init is run at boot time. It will link to >> /mnt/kd/zaptel.conf if that file exists. > > Got it. Hadn't realized /tmp/etc/zaptel.conf was a link too, but I see that > now. > >> What do you have "zapmods" set to in your rc.conf file? > > ZAPMODS="wctdm" > >> What does "lspci" show for this card? > > 03:02.0 Ethernet controller: Digium, Inc.: Unknown device 8005 (rev 11) > > This seems not to match what others have for these cards... > > Just a thought: is it that astlinux only supports the TDM410P out of the box, > and needs a different driver for the TDM410EF? Another thought: lsmod doesn't > list a wcfxo driver - should one be loaded?
What is the EF card? As I recall, this card series requires the newer module that implies a 24 port card. (wctdm24xxp) Try changing ZAPMODS to that and boot. ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to [EMAIL PROTECTED]
