> I would recommend to use the Mediatrix 1124 24 FXS ports gateway. Would this not work out more expensive than getting some internal cards? I've used Digium and OpenVox ones, but would people recommend something else as being more reliable/better quality (Sangoma/Rhino?). If I put three 24-port PCI cards in, that would give me plenty of capacity.
> Not sure the Net 5501 can handle a full PRI-T1 card. Can anyone confirm this? Can the net5501 handle a PRI card? > I'm not sure if you can mix > PRI-T1 cards with BRI or analog cards on the same system. Again, can anyone confirm? I have set-ups with BRI and analogue, but are you saying that PRI and analogue might not work together? So, if I am trying to build a system with, say, 72 FXS, 3 FXO, and a PRI, preferably running off CF, does anyone have any hardware recommendations? Thanks Tom > Tom Chadwin wrote: > > > I've been setting up some remote offices with net5501s, containing a > > combination of TDM cards for POTS lines and ISDN BRI cards. I'm using > > Snom SIP phones. > > > > Our head office requires a bit more thought. It currently has an ISDN > > PRI and three analogue lines, which I could handle in the same way as > > the other sites (assuming the 5501's CPU is powerful enough to run a > > PRI), but it also has around 60 phones. Replacing all of these with > > SIP handsets would be extremely expensive. The CF-card approach of > > Astlinux appeals to me, so what hardware would people recommend for > > Astlinux to connect to all of the above? ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Astlinux-users mailing list Astlinux-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/astlinux-users Donations to support AstLinux are graciously accepted via PayPal to pay...@krisk.org.
